Heat Pump Blower Motor Replacement

Furnace blower motor. This single-phase motor has the following specifications:

Horsepower: 1/3
Voltage: 115
Full-Load Amperage: 5.1
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 4.25”

Furnace blower motor. This single-phase motor has the following specifications:

Horsepower: 1/2
Voltage: 115
Full-Load Amperage: 7.7
Hertz: 60
RPM: 1175
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open

Blower motor, 1/3 hp, 3 speed, 6pl

Condenser Fan Motor, 1/8 HP, 825 RPM's, 60 amps, 1 phase, 200/230 volts

Blower motor 208-230v1ph 1/8hp 1050 rpm

Blower motor 1/3HP 115Volts 60Hz 6.5 amp 1050 RPM's 4 Speed Open Enclosure 48Y Frame Single Phase CCW 4" Shaft

1/2HP 115Volts 60Hz 8 amp 1075 RPM's 5 Speed Open Enclosure 48Y Frame Single Phase CCW 3" Shaft. Any unused wires will need to be taped off or put on the "park" terminals on the control board. These terminals are there specifically for unused wires.

DC indoor motor assembly. *New middle connector between motor & PCB required per manufacturer.

Blower Motor. 1/6 HP, 208/230v 1075 RPM Requires a 5 mfd. 370v capacitor.

Blower motor 3/4hp 115v 1050rpm

Blower motor, 3/4 HP, 115 Volts, 60 Hz, 10 amps, 1075 RPM's, 5 speed open enclosure, 48Y, Frame Single Phase CCW, 2.75" shaft

Blower Motor 1/2hp 1075rpm/3sp ccw 208/230 1ph

Ecm blower motor 1/2 hp 120/240 v 7.7/4.3 amp 1050

Blower Motor 3/4 hp 1075 rpm ccw 208/230 1ph

Motor blower 3/4 hp 208/230v ftv k