Kenmore Range/Stove/Oven Gas Burner & Control Valve Parts

Kenmore Range Gas Burner Control Valve Parts

The gas burner control valve on your Kenmore range regulates gas flow to the cooktop burners. When one or more burners won't ignite, light unevenly, or won't turn off completely, the control valve assembly is often the culprit. These valves are model-specific — Kenmore ranges built by Whirlpool, Frigidaire, and LG use different valve designs and part numbers.

Repair Clinic carries OEM Kenmore gas control valve assemblies for both older and current models. Always verify your model number before ordering, since Kenmore's broad manufacturing base means the wrong valve won't fit or function correctly.

• Burner won't light: Control valve stuck closed; gas not reaching igniter despite clicking
• Burner ignites then goes out: Valve opens but flame sensor or igniter issue; verify these before replacing valve
• Uneven flame: Valve partially stuck or dirty; may respond to cleaning before replacement
• Burner won't turn off: Valve solenoid jammed open; safety hazard — replace immediately
• Yellow/orange flame instead of blue: Often indicates dirty orifice, not valve failure, but valve may need cleaning

Use the model number lookup tool to confirm your exact Kenmore range model and find the correct control valve assembly for your cooktop configuration.

Kenmore Range Gas Valve & Burner Control FAQs

Why is my Kenmore range burner clicking but not lighting?

If you hear the igniter clicking repeatedly but see no spark or flame, the igniter itself is usually the first suspect — not the control valve. However, if the igniter is sparking visibly but the burner still won't light, the control valve may be stuck closed and preventing gas from reaching the burner. You'll need to confirm spark first, then test gas flow at the valve outlet using a gas leak detector or soapy water (never a flame). If gas is reaching the burner but not igniting, replace the igniter. If no gas reaches the burner, the control valve is your next step.

How do I know if my Kenmore range control valve is actually bad?

A visual inspection can reveal obvious damage — a cracked valve body, corroded terminals, or a stuck solenoid plunger. However, most valve failures are functional: the internal seals wear, the solenoid electromagnet loses strength, or debris lodges in the valve seat. Testing requires a multimeter (check solenoid continuity) and a gas meter or leak detector (check downstream gas pressure). If continuity is present and gas is reaching the valve but not leaving it, the valve is almost certainly bad and needs replacement. Repair Clinic's model lookup will show you the exact OEM valve assembly for your range, and verifying your model number prevents expensive wrong-part purchases.

Are Kenmore gas control valves the same across all Kenmore ranges?

No — Kenmore ranges are manufactured by multiple OEM builders depending on the series and age. A 110-series Kenmore washer-dryer built by Whirlpool uses completely different parts than a 253-series refrigerator built by Frigidaire. For ranges, always check your specific model number: older Kenmore ranges from Whirlpool use different valve assemblies than newer Frigidaire-built models. The model number on your range's data label (usually inside the door or on the back wall) is a primary reliable way to get the correct control valve. Repair Clinic's lookup tool cross-references your exact model to the right part.

Can I just replace the solenoid coil on my Kenmore range valve instead of the whole assembly?

Solenoid coils are sold separately for some valve types, but OEM Kenmore control valve assemblies are generally designed as complete units. If only the coil has failed, replacing just the coil might work — check your specific model documentation or contact Repair Clinic support to confirm whether your valve supports coil-only replacement. In most cases, however, ordering the complete OEM valve assembly ensures exact fit, correct sealing, and proper gas flow characteristics for your range model. This is especially true for Kenmore ranges, where model-specific engineering is common.

Order Kenmore Range Gas Burner Control Valve Replacement Online

Keep your Kenmore range running efficiently by replacing a faulty gas burner control valve promptly. With same-day shipping on most in-stock items, you'll have your replacement part fast, minimizing downtime. Our model/part number lookup finds the exact OEM part for your unit, and every order is backed by our 365-day return policy and price-match guarantee. If your Kenmore range gas burner control valve is failing — showing symptoms like reduced performance, unusual noise, or complete non-operation — replacement is typically the fastest fix. Browse our full library of Kenmore repair resources for troubleshooting guides and installation videos.

Kenmore Range/Stove/Oven Model Number: Where to Look

On Kenmore ranges and ovens, the model number is usually printed on a label along the oven door frame, inside the door, or behind the storage drawer. Some models place the label on the back of the appliance, so check there if you do not see it up front. Copy the complete model number, including any letters, numbers, or punctuation. Type it into our model number lookup and the catalog narrows to parts made for your unit. This filters the full Kenmore range, stove, and oven parts selection, not just gas burner or control valve parts, so you can match parts across the entire appliance. You get parts that fit the first time.