Pilot

Monitor temps with this genuine OEM thermocouple, part number 100108268, made for select Maytag, Kenmore, AO Smith, or Honeywell Water Heater.

Thermocouple

Gas Valve Assembly

Heating Element

Thermostat

Aluminum anode rod 3/4" NPT X 3" X 39-1/8

Anode Rod

Resetable thermal switch, 290 degrees, red

Thermoprotector

Cook efficiently with this replacement gas burner, part number S1-02920482000, built for select York, Coleman, or Luxaire Furnace or Packaged Unit/RTU.

Gas Burner

The Frigidaire Oven Burner Igniter 5303935066 is a high-quality replacement part that ignites the gas to light the oven burner. It includes 2 ceramic wire connectors and replaces multiple part numbers

Igniter

Dryer high-limit thermostat, L250-80, with terminal extension arm. This thermostat should be closed for continuity at room temperature and opens at around 250 degrees Fahrenheit. If the dryer won't heat, the high-limit thermostat might be defective.

High Limit Thermostat

image

Water heater not heating

The gas valve opens to allow gas to enter the burner. If the gas valve does not open, the burner will not light, and the water heater will not heat. First, ensure that the ignition source is working properly. Second, ensure that the gas valve has pressure. If the ignition source is working, and the gas valve has pressure, consider replacing the gas valve and thermostat.

Water heater not lighting

The gas valve opens to allow gas to enter the burner. If the gas valve does not open, the burner will not light. First, ensure that the ignition source is working properly. Second, ensure that the gas valve has pressure. If the ignition source is working, and the gas valve has pressure, consider replacing the gas valve and thermostat.

Water heater too hot

The thermostat determines the maximum water temperature setting. If the thermostat is defective, the water temperature may not be set at the proper level. To determine if the thermostat is defective, assess hot water temperature from the nearest faucet. If the water temperature is hotter than the selected thermostat setting, this indicates that the thermostat is defective. If the thermostat is defective, replace the gas valve and thermostat assembly. We recommend a set temperature of 120 degrees or fewer to prevent the risk of scalding.

Water Heater runs out of hot water

The gas valve opens to allow gas to enter the burner. If the gas valve does not open, the burner will not light, and the water heater will not heat. If not corrected, the water heater will eventually run out of hot water. First, ensure that the ignition source is working properly. Second, ensure that the gas valve has pressure. If the ignition source is working, and the gas valve has pressure, consider replacing the gas valve and thermostat.

**We’re excited to be able to offer trade professionals like you substantial volume-based discounts. Our PRO pricing levels are based on your anticipated annual parts spend with us. If your actual monthly spending trends lower than anticipated, your discount may change.

Appliance Parts, Lawn Mower Parts, Heating & Cooling Parts. 365 day returns.

Sign up for your PRO account

Create your account for exclusive discounts and benefits, like:

Your One-Stop

Shop

Join Repair Clinic Pro to unlock technician pricing, same-day shipping, dedicated support, and exclusive benefits tailored for repair professionals.

PRO users get exclusive discounts and benefits, like:

This account is not eligible, please contact your customer service representative for any questions.

Unlock technician pricing and exclusive Pro benefits at Repair Clinic. Join free today.

Repair Clinic Pro

Repair Clinic Pro | Discounts & Benefits for Technicians

Your discounted pricing and other Pro benefits are now available.

Thank You for joining Repair Clinic Pro!

Return parts & products within 365 days of placing your order.

Adhesives & Sealants Parts

Appliance Adhesive & Sealant Parts

Air Filters

Air Filters for Home

Appliance Cleaners

Appliance Cleaners for Sale

Dishrack Parts

Dishrack Replacement Parts

Dryer Vents

Dryer Venting Parts

Equipment Covers

OPE, HVAC & Appliance Part Covers

Fuel Treatments

Fuel System Treatments

Hardware & Fasteners

Hardware and Fasteners Parts

Kitchen Appliance Accessories

Kitchen Accessories Parts

Washer & Dryer Accessories

Dryer and Washer Accessories

Light Bulb Parts

Light Bulb Fixture Parts

Oil & Lubricants

Oil and Lubricant Parts

Paint & Supplies

Touch Up Paint & Supplies

Power Cords Parts

Power Cord Repair Parts

Safety Equipment Parts

Safety Equipment Spare Parts

Testing Equipment Parts

Testing Appliance, OPE & HVAC Parts

Specialty Tools Parts

Specialty Tool Parts for Sale

Vacuum Attachments

Vacuum Attachment Parts

Water Filters & System Parts

Water Filter System Parts

Water Treatment Parts

Water Treatment System Parts

Wire & Connector Parts

OPE, HVAC & Appliance Wire & Connector Parts

Lawn Care Supplies

Yard Care Supplies

Heating & Cooling Supplies

HVAC Supplies

CHANNELLOCK Tools Parts

CHANNELLOCK Replacement Tools

Gas Cans & Nozzles

Nozzles & Gas Cans for Sale

Maintenance Repair Kits

Maintenance Appliance Repair Kits

OPE cleaners & Filters Parts

Outdoor Power Equipment Cleaners & Filters

Power Tools Parts

Power Tool Replacement Parts

Appliances

Refrigerator

Dryer

Range/Stove/Oven

Washing Machine

Dishwasher

Washer/Dryer Combo

Microwave

Freezer

Oven/Microwave Combo

Trash Compactor

Ice Machine

Range Vent Hood

Vacuum Cleaner

Garbage Disposer

Dehumidifier

Bath Fan

Carpet Cleaner

Water Filtration System

Hot Water Dispenser

Lawn & Garden

Small Engine

Lawn Mower

Snowblower

String Trimmer

Pressure Washer

Chainsaw

Tiller

Leaf Blower

Wood Chipper

Hedge Trimmer

Generator

Log Splitter

Pole Pruner

Edger

Power Tools

Heating & Cooling

Furnace

Packaged Unit/RTU

Heat Pump

Central Air Conditioner

Air Conditioner

Air Handler

Water Heater

Humidifier

Unit Heater

Drill

Circular Saw

Miter Saw

Reciprocating Saw

Driver

Grinder

Jig Saw

Nailer & Stapler

Paint Sprayer

Planer & Joiner

Battery

Charger

Air Compressor

Wet/Dry Vacuum

Small Appliances

Blender

Kenmore

Honeywell

Crosley

Gas Valve and Thermostat Assembly

Gas water heater won't heat? This video provides information on how to troubleshoot a gas water heater and the most likely defective parts associated with this problem. Commonly replaced water heater parts: Thermocouple Pilot Gas Valve Thermostat Draft Inducer Heating Element Pressure Switch The information provided in this water heater troubleshooting video is applicable to all brands: Air Bear Trion, Amana, Arcoaire, Broan, Bryant, Carrier, Coleman, Comfortmaker, DuroGuard, Fasco, Frigidaire, Garrison, Gibson, Goodman, Grandaire, Heil, Honeywell, ICM, ICP, Intertherm, Kelvinator, Kenmore, Lennox, Luxaire, Mammoth, Mars, Maytag, Medallion, Miller, Nordyne, Nutone, Payne, Philco, Rheem, Ruud, Tappan, Tempstar, Thermal Zone, Trane, WeatherKing, Westinghouse, White Rogers, York

Gas Water Heater Not Heating? — Gas Water Heater Troubleshooting

Electric water heater won't heat? This video provides information on how to troubleshoot an electric water heater and the most likely defective parts associated with this problem. Commonly replaced water heater parts: Heating Element Thermostat Dip Tube The information provided in this water heater troubleshooting video is applicable to all brands: Air Bear Trion, Amana, Arcoaire, Broan, Bryant, Carrier, Coleman, Comfortmaker, DuroGuard, Fasco, Frigidaire, Garrison, Gibson, Goodman, Grandaire, Heil, Honeywell, ICM, ICP, Intertherm, Kelvinator, Kenmore, Lennox, Luxaire, Mammoth, Mars, Maytag, Medallion, Miller, Nordyne, Nutone, Payne, Philco, Rheem, Ruud, Tappan, Tempstar, Thermal Zone, Trane, WeatherKing, Westinghouse, White Rogers, York

Electric Water Heater Not Heating? — Electric Water Heater Troubleshooting

Gas water heater pilot not lighting? This video provides information on how to troubleshoot a gas water heater and the most likely defective parts associated with this problem. Commonly replaced water heater parts: Thermocouple Pilot Gas Valve Thermostat Draft Inducer Heating Element Pressure Switch The information provided in this water heater troubleshooting video is applicable to all brands: Air Bear Trion, Amana, Arcoaire, Broan, Bryant, Carrier, Coleman, Comfortmaker, DuroGuard, Fasco, Frigidaire, Garrison, Gibson, Goodman, Grandaire, Heil, Honeywell, ICM, ICP, Intertherm, Kelvinator, Kenmore, Lennox, Luxaire, Mammoth, Mars, Maytag, Medallion, Miller, Nordyne, Nutone, Payne, Philco, Rheem, Ruud, Tappan, Tempstar, Thermal Zone, Trane, WeatherKing, Westinghouse, White Rogers, York

Gas Water Heater Pilot Not Lighting? — Gas Water Heater Troubleshooting

Electric water heater won't heat? This video provides information on how to troubleshoot an electric water heater and the most likely defective parts associated with this problem. Commonly replaced water heater parts: Heating Element Thermostat The information provided in this water heater troubleshooting video is applicable to all brands: Air Bear Trion, Amana, Arcoaire, Broan, Bryant, Carrier, Coleman, Comfortmaker, DuroGuard, Fasco, Frigidaire, Garrison, Gibson, Goodman, Grandaire, Heil, Honeywell, ICM, ICP, Intertherm, Kelvinator, Kenmore, Lennox, Luxaire, Mammoth, Mars, Maytag, Medallion, Miller, Nordyne, Nutone, Payne, Philco, Rheem, Ruud, Tappan, Tempstar, Thermal Zone, Trane, WeatherKing, Westinghouse, White Rogers, York

Electric Water Heater Too Hot? — Electric Water Heater Troubleshooting

Electric water heater leaking? This video provides information on how to troubleshoot an electric water heater and the most likely defective parts associated with this problem. Commonly replaced water heater parts: Temperature and Pressure Relief Valve Drain Valve The information provided in this water heater troubleshooting video is applicable to all brands: Air Bear Trion, Amana, Arcoaire, Broan, Bryant, Carrier, Coleman, Comfortmaker, DuroGuard, Fasco, Frigidaire, Garrison, Gibson, Goodman, Grandaire, Heil, Honeywell, ICM, ICP, Intertherm, Kelvinator, Kenmore, Lennox, Luxaire, Mammoth, Mars, Maytag, Medallion, Miller, Nordyne, Nutone, Payne, Philco, Rheem, Ruud, Tappan, Tempstar, Thermal Zone, Trane, WeatherKing, Westinghouse, White Rogers, York

Electric Water Heater Leaking? — Electric Water Heater Troubleshooting

Gas water heater leaking? This video provides information on how to troubleshoot a gas water heater and the most likely defective parts associated with this problem. Commonly replaced water heater parts: Temperature and Pressure Relief Valve Drain Valve The information provided in this water heater troubleshooting video is applicable to all brands: Air Bear Trion, Amana, Arcoaire, Broan, Bryant, Carrier, Coleman, Comfortmaker, DuroGuard, Fasco, Frigidaire, Garrison, Gibson, Goodman, Grandaire, Heil, Honeywell, ICM, ICP, Intertherm, Kelvinator, Kenmore, Lennox, Luxaire, Mammoth, Mars, Maytag, Medallion, Miller, Nordyne, Nutone, Payne, Philco, Rheem, Ruud, Tappan, Tempstar, Thermal Zone, Trane, WeatherKing, Westinghouse, White Rogers, York

Gas Water Heater Leaking? — Gas Water Heater Troubleshooting

This video provides step-by-step instructions for replacing the transmission assembly on Mantis tillers. The most common reason for replacing the transmission assembly is if the tiller is leaking grease or the tines won’t turn and you don’t want to replace any of its component parts individually. All of the information in this transmission assembly replacement video is applicable to the following brands: Mantis Tools used: 7/16” socket and wrench, 5/16” socket, 3/8” socket

Mantis Tiller Transmission Assembly Replacement #400010

This video provides step-by-step instructions for replacing a worm gear bearing on Mantis tillers. The most common reason for replacing a worm gear bearing is if it is worn, which causes the tiller to leak grease. All of the information in this bearing replacement video is applicable to the following brands: Mantis Tools used: adjustable wrench, Phillips head screwdriver, hammer, flat-head screwdriver

Mantis Tiller Worm Gear Bearing Replacement #432

This video provides step-by-step repair instructions for replacing the worm gear on a Mantis tiller. The most common reason for replacing the worm gear is when it is stripped from lack of lubrication. All of the information for this worm gear replacement video is applicable to the following brands: Mantis Tools needed: adjustable wrench, Phillips-head screwdriver, hammer, flathead screwdriver

Mantis Tiller Worm Gear Replacement  #429

Repairing a Mantis tiller? This video shows the proper and safe way to disassemble a tiller and how to access parts that may need to be testing and/or replaced. Tools needed: adjustable wrench, hammer, flat-head screwdriver, Phillips-head screwdriver, 10mm wrench, pliers, 7/16th inch socket and wrench, 5/16th inch socket, 10mm socket

Mantis Tiller - How to Disassemble a Tiller

This video provides step-by-step repair instructions for replacing the tine drive shaft on a Mantis tiller. The most common reason for replacing the tine drive shaft is when making repairs to the engine. All of the information for this tine drive shaft replacement video is applicable to the following brands: Mantis Tools needed: adjustable wrench, Phillips-head screwdriver, hammer, flat-head screwdriver

Mantis Tiller Tine Drive Shaft Replacement #431

This video provides step-by-step instructions for replacing the clutch drum assembly on Mantis tillers. The most common reason for replacing the clutch drum is if the tiller won’t start. All of the information in this clutch drum assembly replacement video is applicable to the following brands: Mantis Tools used: 5/16” socket, 10mm socket

MantisTiller Clutch Drum Assembly Replacement #400131

This video provides step-by-step repair instructions for replacing the trigger handle on a Mantis tiller. The most common reason for replacing the trigger handle is when the cables are broken or bent and the engine won’t start. All of the information for this trigger handle replacement video is applicable to the following brands: Mantis Tools needed: 10mm wrench, pliers, 7/16th inch socket and wrench

Mantis Tiller Trigger Handle Replacement #400290

This video provides step-by-step instructions for replacing the clutch bearing on Mantis tillers. The most common reason for replacing the clutch bearing is if it wears out or the tiller is noisy. All of the information in this bearing replacement video is applicable to the following brands: Mantis Tools used: 5/16” socket, 10mm socket

Tiller Clutch Bearing Replacement – Mantis Tiller   #400132

This video provides step-by-step repair instructions for replacing the transmission drive shaft on a Honda small engine. The most common reason for replacing the drive shaft is when making another repair to the engine. Click here to purchase part #468: www.repairclinic.com/PartDetail/Drive-Shaft/468/1926544?TLSID=1876 All of the information for this transmission drive shaft replacement video is applicable to the following brands: Mantis Tools needed: 5/16th inch socket

Mantis Tiller Transmission Drive Shaft Replacement #468

This video provides step-by-step repair instructions for replacing the tine shaft bearing seal on a Mantis tiller. The most common reasons for replacing the tine shaft seal are when it is damaged or missing. All of the information for this tine shaft bearing seal replacement video is applicable to the following brands: Mantis Tools needed: adjustable wrench, Phillips-head screwdriver, hammer, flat-head screwdriver

Mantis Tiller Tine Shaft Bearing Seal Replacement #434

This video provides step-by-step instructions for replacing the tine shaft bearing retainer on Mantis tillers. The most common reason for replacing the tine shaft bearing retainer is if it is damaged or missing. All of the information in this tine shaft bearing retainer replacement video is applicable to the following brands: Mantis Tools used: adjustable wrench, Phillips head screwdriver, hammer, flat-head screwdriver

Mantis Tiller Tine Shaft Bearing Retainer Replacement #435

This video provides step-by-step repair instructions for replacing the gear case gasket on a Mantis tiller. The most common reason for replacing the gear case gasket is when it is damaged. All of the information for this gear case gasket replacement video is applicable to the following brands: Mantis Tools needed: Phillips-head screwdriver

Mantis Tiller Gear Case Gasket Replacement #436

This video provides step-by-step instructions for replacing the right-hand tine on Mantis tillers. The most common reason for replacing the tine is if it is worn. All of the information in this tine replacement video is applicable to the following brands: Mantis Tools used: none

Mantis Tiller Tine Replacement, Right #438RA

This video provides step-by-step repair instructions for replacing the left-hand tine on a Mantis tiller. The most common reason for replacing the tine is when it is worn-out. All of the information for this left-hand tine replacement video is applicable to the following brands: Mantis Tools needed: none

Mantis Tiller Tine Replacement, Left #438LA

Water Heater Gas Valve and Thermostat Assembly 37C73U-173

This part 37C73U-173 is compatible with:

Related Articles & Videos

Gas Valve and Thermostat Assembly Customer Reviews

Common Problems Fixed by the Gas Valve and Thermostat Assembly

Water heater not heating

Water heater not lighting

Water heater too hot

Water Heater runs out of hot water

About the Gas Valve and Thermostat Assembly

Shop by Brands

Repair Help by Brands and Product Type

Alternative Part Number(s)

Talk With Us

Talk With Us