Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket.  Replaces R/S 41-406
Grid is 1 inch square
  Igniter 767A-374
  Igniter 767A-374

Igniter 767A-374

Genuine OEM Part # 767A-374RC Item # 2979551Alternative Part Number(s)
Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket.  Replaces R/S 41-406
Grid is 1 inch square
  Igniter 767A-374
  Igniter 767A-374
$23.95
Loading stock status
Loading stock status
Does this part fit my product?
Find your model number or log in to select it from your saved machines.
Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket. Replaces R/S 41-406
Helpful Tips
If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.
Loading stock status
$23.95
start a live chat with Repair Clinic customer support

This part 767A-374 is compatible with:

Product Type:
Furnace
Brands:
Trane, White Rodgers

Related Articles & Videos

04:23
How This Part Works
Furnace Igniter Replacement
02:02
Part Testing
Furnace Not Igniting or Heating? Igniter Testing, Repair
03:52
Troubleshooting
Furnace Not Heating — Furnace Troubleshooting
00:45
Troubleshooting
Replace Furnace Filters - Tech Tips from Repair Clinic
02:47
Troubleshooting
Furnace Starts Then Stops — Furnace Troubleshooting
Frequently Bought with Igniter
LH680534 Flame Sensor
5303935066 Igniter
HH18HA493 Limit Switch
S1-03103010000 Control Board

Igniter Customer Reviews

Common Problems Fixed by the Igniter

Based on customer reports and repair data, this part commonly fixes these issues:

About the Igniter

The igniter gets very hot and glows bright orange to light the gas burner. If the igniter fails or cracks, the furnace won’t heat. To determine if the igniter is faulty, remove the igniter and inspect it for cracks. If the igniter is cracked, replace it. If the igniter is not cracked, use a multimeter to test the igniter for continuity. If the igniter does not have continuity, replace it.

Repair Help by Brands and Product Type

Alternative Part Number(s)

Replaces Part Number 41-406
Replaces Part Number 41406
Replaces Part Number IG406
Part Production Number 201J
Part Production Number 201M
Part Production Number 201Y
Part Production Number 271Y
Part Production Number 271B