Hot Surface Ignitor with 5-1/4" Leads, NM Style Mounting Block, right tab, Insulation 200°C, Connector with Brackets, Includes Ceramic Wire Nuts.  Replaces R/S 41-414
Grid is 1 inch square
White Rodgers Igniter 767A-384
White Rodgers Igniter 767A-384
White Rodgers Igniter 767A-384
White Rodgers Igniter 767A-384

White Rodgers Igniter 767A-384

Genuine OEM Part # 767A-384RC Item # 2979562Alternative Part Number(s)
Hot Surface Ignitor with 5-1/4" Leads, NM Style Mounting Block, right tab, Insulation 200°C, Connector with Brackets, Includes Ceramic Wire Nuts.  Replaces R/S 41-414
Grid is 1 inch square
White Rodgers Igniter 767A-384
White Rodgers Igniter 767A-384
White Rodgers Igniter 767A-384
White Rodgers Igniter 767A-384
$30.05
Loading stock status
Loading stock status
Does this part fit my product?
Find your model number or log in to select it from your saved machines.
Hot Surface Ignitor with 5-1/4" Leads, NM Style Mounting Block, right tab, Insulation 200°C, Connector with Brackets, Includes Ceramic Wire Nuts. Replaces R/S 41-414
Helpful Tips
If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.
Loading stock status
$30.05
start a live chat with Repair Clinic customer support

This part 767A-384 is compatible with:

Product Type:
Furnace
Brands:
White Rodgers

Related Articles & Videos

04:23
How This Part Works
Furnace Igniter Replacement
02:02
Part Testing
Furnace Not Igniting or Heating? Igniter Testing, Repair
03:52
Troubleshooting
Furnace Not Heating — Furnace Troubleshooting
00:45
Troubleshooting
Replace Furnace Filters - Tech Tips from Repair Clinic
02:47
Troubleshooting
Furnace Starts Then Stops — Furnace Troubleshooting
Frequently Bought with Igniter
LH680534 Flame Sensor
5303935066 Igniter
HH18HA493 Limit Switch
S1-03103010000 Control Board

Igniter Customer Reviews

Common Problems Fixed by the Igniter

Based on customer reports and repair data, this part commonly fixes these issues:

About the Igniter

The igniter gets very hot and glows bright orange to light the gas burner. If the igniter fails or cracks, the furnace won’t heat. To determine if the igniter is faulty, remove the igniter and inspect it for cracks. If the igniter is cracked, replace it. If the igniter is not cracked, use a multimeter to test the igniter for continuity. If the igniter does not have continuity, replace it.

Repair Help by Brands and Product Type

Alternative Part Number(s)

Replaces Part Number 41-414
Replaces Part Number IG414
Replaces Part Number 767A-384
Part Production Number 217NM
Part Production Number 271NM