Name: Throttle Control
Brand: Husqvarna
SKU: i2402171
Price: 8.34 USD
Availability: OutOfStock

Husqvarna fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.

Fuel Filter

Fuel line kit. Both large & small diameter fuel lines included. The fuel line allows fuel to travel from the fuel tank to the carburetor and from the primer bulb to the fuel system. If the fuel line is leaking, replace it.

Fuel Line

Champion Spark Plug (RC12YC). The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.

Spark Plug

Small engine primer bulb. The primer bulb draws additional fuel into the carburetor to help start the engine.

Primer Bulb

FreshFlow air filter, reduces common food odors in the refrigerator. 15 times more powerful than baking soda. Replace every 6 months

Air Filter

Seal tanks with this replacement fuel cap, part number 951-10300, made for select Bolens, Craftsman, Huskee, MasterCut, MTD, Troy-Bilt, Yard Machines, Yard-Man, Murray, Cub Cadet, or Husky Lawn Mower, Small Engine, Snowblower, Tiller, Leaf Blower, Log Splitter, or Wood Chipper.

Fuel Cap

Tecumseh carburetor repair kit. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run poorly.

Carburetor Repair Kit

Fuel systems run smoothly with this genuine OEM carburetor, part number 16100-Z8B-901, built for select Honda Lawn Mower.

Carburetor

Drive Clutch (Splutch) Kit. This kit has 6 parts; a spring, housing, cam ring, basket drive gear, pulley, and nut. The pulley is driven by the belt and the splutch works with the mode shift actuator to drive the washplate and spin the inner basket. A worn splutch can cause spin or washplate problems

Clutch

Regulate fuel flow with this genuine OEM carburetor diaphragm, part number 630978, made for select Craftsman, Tecumseh, Toro, or Gladiator Lawn Mower, Small Engine, Snowblower, String Trimmer, or Edgers.

Carburetor Diaphragm

image

Craftsman Chainsaw Throttle Control Replacement #525328001

This video provides step-by-step instructions for replacing the throttle control on Craftsman and Poulan chainsaws. The most common reason for replacing the throttle control is when the trigger is broken, causing the engine to not rev up when the throttle trigger is pulled. All of the information for this throttle control replacement video is applicable to the following brands: Craftsman, Poulan Tools used: T25 Torx bit screwdriver, 5/16” socket

Chainsaw

358.350980

358.350981

358.350982

PP5020AV

**We’re excited to be able to offer trade professionals like you substantial volume-based discounts. Our PRO pricing levels are based on your anticipated annual parts spend with us. If your actual monthly spending trends lower than anticipated, your discount may change.

Appliance Parts, Lawn Mower Parts, Heating & Cooling Parts. 365 day returns.

Sign up for your PRO account

Create your account for exclusive discounts and benefits, like:

Your One-Stop

Shop

Join Repair Clinic Pro to unlock technician pricing, same-day shipping, dedicated support, and exclusive benefits tailored for repair professionals.

PRO users get exclusive discounts and benefits, like:

This account is not eligible, please contact your customer service representative for any questions.

Unlock technician pricing and exclusive Pro benefits at Repair Clinic. Join free today.

Repair Clinic Pro

Repair Clinic Pro | Discounts & Benefits for Technicians

Your discounted pricing and other Pro benefits are now available.

Thank You for joining Repair Clinic Pro!

Return parts & products within 365 days of placing your order.

Adhesives & Sealants Parts

Appliance Adhesive & Sealant Parts

Air Filters

Air Filters for Home

Appliance Cleaners

Appliance Cleaners for Sale

Dishrack Parts

Dishrack Replacement Parts

Dryer Vents

Dryer Venting Parts

Equipment Covers

OPE, HVAC & Appliance Part Covers

Fuel Treatments

Fuel System Treatments

Hardware & Fasteners

Hardware and Fasteners Parts

Kitchen Appliance Accessories

Kitchen Accessories Parts

Washer & Dryer Accessories

Dryer and Washer Accessories

Light Bulb Parts

Light Bulb Fixture Parts

Oil & Lubricants

Oil and Lubricant Parts

Paint & Supplies

Touch Up Paint & Supplies

Power Cords Parts

Power Cord Repair Parts

Safety Equipment Parts

Safety Equipment Spare Parts

Testing Equipment Parts

Testing Appliance, OPE & HVAC Parts

Specialty Tools Parts

Specialty Tool Parts for Sale

Vacuum Attachments

Vacuum Attachment Parts

Water Filters & System Parts

Water Filter System Parts

Water Treatment Parts

Water Treatment System Parts

Wire & Connector Parts

OPE, HVAC & Appliance Wire & Connector Parts

Lawn Care Supplies

Yard Care Supplies

Heating & Cooling Supplies

HVAC Supplies

CHANNELLOCK Tools Parts

CHANNELLOCK Replacement Tools

Gas Cans & Nozzles

Nozzles & Gas Cans for Sale

Maintenance Repair Kits

Maintenance Appliance Repair Kits

OPE cleaners & Filters Parts

Outdoor Power Equipment Cleaners & Filters

Power Tools Parts

Power Tool Replacement Parts

Appliances

Refrigerator

Dryer

Range/Stove/Oven

Washing Machine

Dishwasher

Washer/Dryer Combo

Microwave

Freezer

Oven/Microwave Combo

Trash Compactor

Ice Machine

Range Vent Hood

Vacuum Cleaner

Garbage Disposer

Dehumidifier

Hot Water Dispenser

Heating & Cooling

Furnace

Packaged Unit/RTU

Heat Pump

Central Air Conditioner

Air Conditioner

Air Handler

Humidifier

Craftsman

Poulan

Control speed with this replacement throttle control, part number 525328001, built for select Craftsman or Poulan Chainsaws.

Throttle Control

Control Cable

Chainsaw chain won't turn? This video provides information on how to troubleshoot a chainsaw and the most likely defective parts associated with this problem. Commonly replaced chainsaw parts: Chain Chain Bar Control Cable Start Pulley Pull Rope Gas Tank Fuel Line The information provided in this chainsaw troubleshooting video is applicable to all chainsaw brands: Ariens, Bolens, Craftsman, Cub Cadet, Dixon, Echo, Exmark, Green Machine, Homelite, Honda, Huskee, Husqvarna, John Deere, Lawn Boy, MasterCut, Montgomery Wards, MTD, Murray, Poulan, Poulan Pro, Ryobi, Simplicity, Toro, Snapper, Troy-Bilt, Turf King, Weed Eater, Wheel Horse, Worx, Yard Machines, Yard-Man

Chainsaw Chain Not Turning — Chainsaw Troubleshooting

Chainsaw chain won't stop turning? This video provides information on how to troubleshoot a chainsaw and the most likely defective parts associated with this problem. Commonly replaced chainsaw parts: Chain Chain Bar Control Cable Start Pulley Pull Rope Gas Tank Fuel Line The information provided in this chainsaw troubleshooting video is applicable to all chainsaw brands: Ariens, Bolens, Craftsman, Cub Cadet, Dixon, Echo, Exmark, Green Machine, Homelite, Honda, Huskee, Husqvarna, John Deere, Lawn Boy, MasterCut, Montgomery Wards, MTD, Murray, Poulan, Poulan Pro, Ryobi, Simplicity, Toro, Snapper, Troy-Bilt, Turf King, Weed Eater, Wheel Horse, Worx, Yard Machines, Yard-Man

Chainsaw Chain Won't Stop Turning — Chainsaw Troubleshooting

Chainsaw starts, then stalls? This video provides information on how to troubleshoot a chainsaw and the most likely defective parts associated with this problem. Commonly replaced chainsaw parts: Chain Chain Bar Control Cable Start Pulley Pull Rope Gas Tank Fuel Line The information provided in this chainsaw troubleshooting video is applicable to all chainsaw brands: Ariens, Bolens, Craftsman, Cub Cadet, Dixon, Echo, Exmark, Green Machine, Homelite, Honda, Huskee, Husqvarna, John Deere, Lawn Boy, MasterCut, Montgomery Wards, MTD, Murray, Poulan, Poulan Pro, Ryobi, Simplicity, Toro, Snapper, Troy-Bilt, Turf King, Weed Eater, Wheel Horse, Worx, Yard Machines, Yard-Man

Top Reasons Chainsaw Starts, Then Stalls — Chainsaw Troubleshooting

Chainsaw won't start? This video provides information on how to troubleshoot a chainsaw and the most likely defective parts associated with this problem. Commonly replaced chainsaw parts: Chain Chain Bar Control Cable Start Pulley Pull Rope Gas Tank Fuel Line The information provided in this chainsaw troubleshooting video is applicable to all chainsaw brands: Ariens, Bolens, Craftsman, Cub Cadet, Dixon, Echo, Exmark, Green Machine, Homelite, Honda, Huskee, Husqvarna, John Deere, Lawn Boy, MasterCut, Montgomery Wards, MTD, Murray, Poulan, Poulan Pro, Ryobi, Simplicity, Toro, Snapper, Troy-Bilt, Turf King, Weed Eater, Wheel Horse, Worx, Yard Machines, Yard-Man

Top Reasons Chainsaw Won't Start — Chainsaw Troubleshooting

Chainsaw not cutting? This video provides information on how to troubleshoot a chainsaw and the most likely defective parts associated with this problem. Commonly replaced chainsaw parts: Chain Chain Bar Control Cable Start Pulley Pull Rope Gas Tank Fuel Line The information provided in this chainsaw troubleshooting video is applicable to all chainsaw brands: Ariens, Bolens, Craftsman, Cub Cadet, Dixon, Echo, Exmark, Green Machine, Homelite, Honda, Huskee, Husqvarna, John Deere, Lawn Boy, MasterCut, Montgomery Wards, MTD, Murray, Poulan, Poulan Pro, Ryobi, Simplicity, Toro, Snapper, Troy-Bilt, Turf King, Weed Eater, Wheel Horse, Worx, Yard Machines, Yard-Man

Top Reasons Chainsaw Not Cutting — Chainsaw Troubleshooting

Chainsaw running rough? This video provides information on how to troubleshoot a chainsaw and the most likely defective parts associated with this problem. Commonly replaced chainsaw parts: Chain Chain Bar Control Cable Start Pulley Pull Rope Gas Tank Fuel Line The information provided in this chainsaw troubleshooting video is applicable to all chainsaw brands: Ariens, Bolens, Craftsman, Cub Cadet, Dixon, Echo, Exmark, Green Machine, Homelite, Honda, Huskee, Husqvarna, John Deere, Lawn Boy, MasterCut, Montgomery Wards, MTD, Murray, Poulan, Poulan Pro, Ryobi, Simplicity, Toro, Snapper, Troy-Bilt, Turf King, Weed Eater, Wheel Horse, Worx, Yard Machines, Yard-Man

Top Reasons Chainsaw Running Rough — Chainsaw Troubleshooting

Repairing a Craftsman chainsaw? This video demonstrates the proper and safe way to disassemble a chainsaw and how to access parts that may need to be tested and/or replaced. Here is a list of the most common chainsaw problems: Chainsaw won't start Chainsaw engine stops after a few seconds Chainsaw runs poorly Chainsaw chain does not turn Chainsaw chain won't stop turning Chainsaw does not cut properly

Craftsman Chainsaw Disassembly – Chainsaw Repair Help

This video provides step-by-step instructions for replacing the carburetor on Craftsman and Poulan chainsaws. The most common reason for replacing the carburetor is when it is clogged, causing the engine to run poorly or not at all, and cleaning the carburetor does not fix the problem. All of the information for this carburetor replacement video is applicable to the following brands: Poulan, Craftsman Tools used: T25 Torx bit screwdriver, 5/16” socket, needle-nose pliers

Craftsman Chainsaw Running Roughly? Carburetor #573952201

This video provides step-by-step repair instructions for replacing the cutting chain on a Craftsman chainsaw. The most common reason for replacing the cutting chain is when the chainsaw doesn’t cut properly. All of the information for this cutting chain replacement video is applicable to the following brands: Craftsman Tools needed: 13mm socket

Craftsman Chainsaw Cutting Chain Replacement #585889914

This video provides step-by-step instructions for replacing the clutch on Craftsman and Poulan chainsaws. The most common reasons for replacing the clutch are when the chain does not turn, won’t stop turning, or does not cut properly. All of the information for this clutch replacement video is applicable to the following brands: Poulan, Craftsman Tools used: 13mm socket, large flat-head screwdriver, hammer

Craftsman Chainsaw Chain Won't Turn? Replace Clutch #579551001

This video provides step-by-step instructions for replacing the oil pump tube on Craftsman chainsaws. The most common reasons for replacing the oil pump tube are when it is missing or damaged in any way, causing the chainsaw to leak oil or not get lubricated enough. All of the information for this oil pump tube replacement video is applicable to the following brands: Craftsman Tools used: 13mm socket, large flat-head screwdriver, hammer, small flat-head screwdriver, T15 Torx bit screwdriver, pliers

CraftsmanChainsaw Oil Pump Tube Replacement #545221301

This video provides step-by-step instructions for replacing the starter pulley on Craftsman chainsaws. The most common reason for replacing the starter pulley is if the starter rope won’t retract. All of the information for this starter pulley replacement video is applicable to the following brands: Craftsman Tools used: T25 Torx bit screwdriver

Craftsman Chainsaw Starter Pulley Replacement #576744401

This video provides step-by-step instructions for replacing the oil pump on Craftsman chainsaws. The most common reason for replacing the pump is when any part of the pump is worn or damaged, causing the chain bar and cutting chain to not be lubricated properly. All of the information for this oil pump replacement video is applicable to the following brands: Craftsman Tools used: 13mm socket, large flat-head screwdriver, hammer, small flat-head screwdriver, T15 Torx bit screwdriver

Craftsman Chainsaw Oil Pump Replacement #545165401

This video provides step-by-step repair instructions for replacing the chain bar on a Craftsman chainsaw. The most common reason for replacing the chain bar is when the chainsaw doesn’t cut properly. All of the information for this chain bar replacement video is applicable to the following brands: Craftsman Tools needed: wrench or 13mm socket

Craftsman Chainsaw Chain Bar Replacement #545196102

This video provides step-by-step instructions for replacing the clutch drum and sprocket assembly on Craftsman chainsaws. The most common reasons for replacing the drum and sprocket assembly is if it is worn down or has broken gear, causing the chain to not work properly. All of the information for this clutch drum and sprocket assembly replacement video is applicable to the following brands: Craftsman Tools used: 13mm socket, large flat-head screwdriver, hammer

Craftsman Chainsaw Clutch Drum & Sprocket Assembly #545171901

This video provides step-by-step instructions for replacing the chain tensioner on Craftsman and Poulan chainsaws. The most common reason for replacing the tensioner is when the chainsaw bar doesn’t adjust when you turn the tension screw and the tensioner, rather than the tension screw, the tension gear, or the adjustment bolt, is worn or damaged. All of the information for this chain tensioner replacement video is applicable to the following brands: Craftsman, Poulan Tools used: 13mm socket, large flat-head screwdriver

Chainsaw Chain Tensioner Replacement #576752301

This video provides step-by-step repair instructions for replacing the ignition module (which contains the ignition coil and spark plug boot) on a Craftsman chainsaw. The most common reason for replacing the ignition module is when the chainsaw won’t start. All of the information for this ignition module replacement video is applicable to the following brands: Craftsman, Poulan Tools needed: T-25 Torx bit screwdriver, T-20 Torx bit screwdriver

Craftsman Chainsaw Ignition Module Replacement #545202701

This video provides step-by-step instructions for replacing the spark plug on Craftsman and Stihl chainsaws. The most common reason for replacing the spark plug is when the chainsaw won’t start or runs poorly and testing the spark plug proves it is defective. All of the information for this spark plug replacement video is applicable to the following brands: Stihl, Craftsman Tools used: spark plug wrench included with chainsaw

Craftsman Chainsaw Won't Start? Spark Plug Replacement #848

This video provides step-by-step repair instructions for replacing the oil pump kit on a Craftsman chainsaw. The most common reason for replacing the oil pump is when the cutting chain doesn’t run smoothly. All of the information for this oil pump replacement video is applicable to the following brands: Craftsman Tools needed: 13mm socket, large flat-head screwdriver, hammer, small flat-head screwdriver, T-15 Torx bit screwdriver, pliers

Craftsman Chainsaw Oil Pump Kit Replacement #576753201

This video provides step-by-step repair instructions for replacing the starter rope on a Craftsman chainsaw. The most common reason for replacing the starter rope is when it is broken or frayed. All of the information for this starter rope replacement video is applicable to the following brands: Craftsman Tools needed: T-25 Torx bit screwdriver

Craftsman Chainsaw Starter Rope Replacement #530069919

This video provides step-by-step repair instructions for replacing the flywheel on a Craftsman chainsaw. The most common reason for replacing the flywheel is when the chainsaw won’t start. All of the information for this chainsaw flywheel replacement video is applicable to the following brands: Craftsman Tools needed: T-25 Torx bit screwdriver, 13mm socket, large flat-head screwdriver

Craftsman Chainsaw Flywheel Replacement #525742101

This video provides step-by-step repair instructions for replacing the spark arrestor on a Craftsman chainsaw. The most common reasons for replacing the spark arrestor are when the chainsaw won’t start, stops after a few seconds, or runs poorly. All of the information for this spark arrestor replacement video is applicable to the following brands: Craftsman, Poulan Tools needed: 13mm socket, large flat-head screwdriver, hammer, small flat-head screwdriver, T-15 Torx bit screwdriver, pliers

Craftsman Chainsaw Stalls? Replace Spark Arrestor #576752401

This video provides step-by-step repair instructions for replacing the bar adjustment pin on a Craftsman chainsaw. The most common reason for replacing the bar adjustment pin is when it is stripped or damaged. All of the information for this bar adjustment pin replacement video is applicable to the following brands: Poulan, Poulan Pro, Husqvarna, Craftsman Tools needed: 13mm socket, large flat-head screwdriver

Craftsman Chainsaw Bar Adjustment Pin Replacement #530015826

This video provides step-by-step instructions for replacing the clutch over on Craftsman chainsaws. The most common reason for replacing the clutch cover is if it is missing or damaged; the clutch cover is a safety feature. All of the information for this clutch cover replacement video is applicable to the following brands: Craftsman Tools used: 13mm socket

Craftsman Chainsaw Clutch Cover Replacement #577234602

This video provides step-by-step repair instructions for replacing the drive spring (or starter spring) on a Craftsman chainsaw. The most common reason for replacing the drive spring is when the starter rope is hard to pull. All of the information for this starter spring replacement video is applicable to the following brands: Craftsman Tools needed: T-25 Torx bit screwdriver

Chainsaw Throttle Control 525328001

This part 525328001 is compatible with:

Related Articles & Videos

Throttle Control Customer Reviews

Popular models

Shop by Brands

Repair Help by Brands and Product Type

Talk With Us

Talk With Us