Shop replacement repair parts for Amana Dryer model LG8569L2/PLG8569L2

Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.

Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.

Thermal Fuse

Drum drive motor

Igniter (Bracket is no longer included.) If your old igniter was round you will need to order the bracket in the related parts below.

Heating Element Assembly 240V

High limit thermostat, L225-40F

Heating element kit with thermostat, thermal fuse and wires, 208 volts

This is a genuine replacement part. Whirlpool 489P3 Thermostat.

Assy, wire harness

Harness, wire -gas valve

Microcomputer assembly

3 wire cycling thermostat with pre-heater L138-155

Timer control assembly

Dryer timer