Shop replacement repair parts for Dolmar String Trimmer model MS-22 C

Shaft

Trimmer head eyelet ms-331c

Crankcase gasket
Restore your Dolmar MS-22 C string trimmer to reliable operation with genuine OEM replacement parts from Repair Clinic. The MS-22 C is a straight-shaft two-stroke gas string trimmer from Dolmar, a Makita-affiliated brand. The carburetor, air filter, fuel filter, spark plug, and trimmer head are the most frequently serviced components. Repair Clinic stocks genuine Dolmar OEM parts for the MS-22 C including the Dolmar trimmer carburetor parts, Dolmar trimmer air filter parts, Dolmar trimmer spark plug parts, and Dolmar trimmer string head parts. Browse the Dolmar string trimmer parts catalog filtered by MS-22 C for the complete parts inventory.
The Dolmar MS-22 C uses a two-stroke engine requiring a premixed fuel and oil ratio as specified in the owner’s manual. Dolmar is a Makita-affiliated brand, and many trimmer components share design lineage with equivalent Makita models. Carburetor varnish from ethanol-blend fuel during off-season storage is the leading cause of hard starting and power loss at the start of the trimming season. The string trimmer repair help section covers MS-22 C carburetor service and trimmer head line winding.
The diaphragm carburetor is susceptible to varnish deposits from ethanol-blend fuel during off-season storage. Cleaning restores function in most cases. When the diaphragm has hardened or cracked, carburetor replacement is the most reliable solution.
Annual spark plug replacement maintains reliable starting. Always use the fuel mixture ratio specified in the owner’s manual.
Replace the air filter at the start of each trimming season. A clogged filter causes the engine to run rich and lose cutting power.
The bump-feed trimmer head advances line when tapped against the ground. Replace the head when the bump knob mechanism no longer advances line reliably.
The Dolmar MS-22 C is a straight-shaft two-stroke gas string trimmer from Dolmar. Dolmar is a Makita-affiliated brand, and many Dolmar trimmer components share design lineage with equivalent Makita string trimmer models. The C designation identifies a specific handle or starting system configuration within the MS-22 series.
Hard starting after storage is most commonly caused by carburetor varnish from ethanol-blend fuel sitting in the float bowl during warm months. Drain the float bowl before off-season storage. Replace the in-tank fuel filter and clean the carburetor before ordering a replacement.
Press the retainer tabs on the bump knob to remove the spool. Wind new line in the direction shown by the arrow on the spool, thread the ends through the eyelets on the head housing, and snap the spool back into place.
Power loss under load most commonly indicates a clogged air filter, a partially blocked carburetor main jet from ethanol varnish, or a clogged fuel filter restricting fuel delivery. Replace the air filter and fuel filter before disassembling the carburetor.

Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic

