Dolmar String Trimmer MS-22 C Parts

Shop replacement repair parts for Dolmar String Trimmer model MS-22 C

icons/string trimmer
Brand:Dolmar
Model:MS-22 C
Product:String Trimmer
153 results
Go

Dolmar MS-22 C Problems & Repair Solutions

There are only a handful of issues that crop up with most appliances and equipment. Since 1912, we've learned to recognize the most common Dolmar MS-22 C problems ― and their solutions. Do any of these look familiar?

Frequently Purchased Together For This Model

Spark Plug
Fuel Line
Bump Knob
Bolt

Restore your Dolmar MS-22 C string trimmer to reliable operation with genuine OEM replacement parts from Repair Clinic. The MS-22 C is a straight-shaft two-stroke gas string trimmer from Dolmar, a Makita-affiliated brand. The carburetor, air filter, fuel filter, spark plug, and trimmer head are the most frequently serviced components. Repair Clinic stocks genuine Dolmar OEM parts for the MS-22 C including the Dolmar trimmer carburetor parts, Dolmar trimmer air filter parts, Dolmar trimmer spark plug parts, and Dolmar trimmer string head parts. Browse the Dolmar string trimmer parts catalog filtered by MS-22 C for the complete parts inventory.

Dolmar MS-22 C: Two-Stroke Straight-Shaft Trimmer and Makita Brand Context

The Dolmar MS-22 C uses a two-stroke engine requiring a premixed fuel and oil ratio as specified in the owner’s manual. Dolmar is a Makita-affiliated brand, and many trimmer components share design lineage with equivalent Makita models. Carburetor varnish from ethanol-blend fuel during off-season storage is the leading cause of hard starting and power loss at the start of the trimming season. The string trimmer repair help section covers MS-22 C carburetor service and trimmer head line winding.

Most Replaced Parts on the Dolmar MS-22 C

Carburetor for the Dolmar MS-22 C

The diaphragm carburetor is susceptible to varnish deposits from ethanol-blend fuel during off-season storage. Cleaning restores function in most cases. When the diaphragm has hardened or cracked, carburetor replacement is the most reliable solution.

Spark Plug for the MS-22 C

Annual spark plug replacement maintains reliable starting. Always use the fuel mixture ratio specified in the owner’s manual.

Air Filter for the Dolmar MS-22 C

Replace the air filter at the start of each trimming season. A clogged filter causes the engine to run rich and lose cutting power.

Trimmer Head for the MS-22 C

The bump-feed trimmer head advances line when tapped against the ground. Replace the head when the bump knob mechanism no longer advances line reliably.

Why Choose Repair Clinic for Dolmar MS-22 C Parts

  • Genuine Dolmar OEM Components: Carburetors, spark plugs, air filters, and trimmer heads confirmed for the Dolmar MS-22 C two-stroke straight-shaft trimmer Dolmar string trimmer parts.
  • Dolmar and Makita Brand Context: Dolmar is a Makita-affiliated brand. Many trimmer components share design lineage with equivalent Makita models.
  • Fuel Filter First Diagnostic Guidance: Annual in-tank fuel filter replacement before carburetor disassembly is documented as the most cost-effective first step through string trimmer repair help.
  • 365-Day Returns: Return any uninstalled Dolmar part within a full year of purchase with no restocking fees.

Dolmar MS-22 C String Trimmer Parts FAQ

What is the Dolmar MS-22 C and what type of trimmer is it?

The Dolmar MS-22 C is a straight-shaft two-stroke gas string trimmer from Dolmar. Dolmar is a Makita-affiliated brand, and many Dolmar trimmer components share design lineage with equivalent Makita string trimmer models. The C designation identifies a specific handle or starting system configuration within the MS-22 series.

Why does my Dolmar MS-22 C not start after off-season storage?

Hard starting after storage is most commonly caused by carburetor varnish from ethanol-blend fuel sitting in the float bowl during warm months. Drain the float bowl before off-season storage. Replace the in-tank fuel filter and clean the carburetor before ordering a replacement.

How do I reload the trimmer head on the Dolmar MS-22 C?

Press the retainer tabs on the bump knob to remove the spool. Wind new line in the direction shown by the arrow on the spool, thread the ends through the eyelets on the head housing, and snap the spool back into place.

Why does my Dolmar MS-22 C lose power under trimming load?

Power loss under load most commonly indicates a clogged air filter, a partially blocked carburetor main jet from ethanol varnish, or a clogged fuel filter restricting fuel delivery. Replace the air filter and fuel filter before disassembling the carburetor.