Shop replacement repair parts for Payne Furnace model PG8UAA060155ADJA

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Furnace draft inducer motor with cooling fan. Be aware that the screw holes are not threaded—you will need to use self-tapping screws to install the motor.

Furnace draft inducer motor cooling fan blade and clip. You may have to cut the old clip off to remove the fan blade.

Blower wheel for draft inducer motor 4" Diameter 1.5" Width

Gas valve kit. *Should be installed by a certified Carrier repairperson.

12" x 10" blower wheel, 1/2" bore, CW.

Carrier furnace blower motor. This single-phase motor has the following specifications:
Horsepower: ¾
Voltage: 115
FLA (full load amps): 11.1
RPM: 1075
Speeds: 4
Rotation: CCW
Frame: 48
Shaft Length: 4”

Unframed filter, 16 X 25 inches

Blower housing asy

Filter unframed

Filter