Ensure your 2AC13B24P-1A central air conditioner running efficiently with genuine OEM replacement parts from Repair Clinic. The 2AC13B24P-1A is a two-ton, 13 SEER residential outdoor condensing unit using R-410A Puron refrigerant. The 2AC13B series identifies an older Lennox 13 SEER residential outdoor condensing unit platform. The 24 identifies two-ton capacity and B-1A identifies the cabinet configuration and production revision. The dual run capacitor, contactor, and outdoor fan motor account for the vast majority of service calls. Repair Clinic stocks genuine Lennox OEM parts for the 2AC13B24P-1A including the Lennox capacitor parts, Lennox contactor parts, Lennox fan motor parts, and Lennox high-pressure switch parts. Browse the Lennox central air conditioner parts catalog filtered by 2AC13B24P-1A for the complete parts inventory.
2AC13B24P-1A: Two-Ton, 13 Seer Outdoor Condensing Unit Service
Annual capacitance testing of the dual run capacitor before the cooling season is the most cost-effective preventive maintenance step for the 2AC13B24P-1A. Match all microfarad values from the installed capacitor label before ordering a replacement. The central air conditioner repair help section covers capacitor testing and contactor diagnosis for this platform.
Most Replaced Parts on the 2AC13B24P-1A
Dual Run Capacitor for the 2AC13B24P-1A
The dual run capacitor provides starting and running torque for both the compressor and outdoor fan motor. A reading more than 10% below the rated value causes the compressor to hard-start. Match all three microfarad values from the installed capacitor label before ordering.
2AC13B24P-1A Contactor
The contactor closes the 240-volt compressor circuit at every cooling cycle start. Pitted or burned contacts generate heat that transfers to the compressor motor terminals. Replace a contactor with visibly eroded contacts before compressor winding damage occurs.
Outdoor Fan Motor for the 2AC13B24P-1A
The outdoor fan motor pulls air through the condenser coil. Test the run capacitor before ordering a replacement motor, as a failed capacitor produces identical slow-start symptoms at a fraction of the motor replacement cost.
High-Pressure Switch for the 2AC13B24P-1A
A high-pressure switch that trips repeatedly under normal ambient conditions points to a blocked condenser coil, failed fan motor, or refrigerant overcharge rather than a failed switch diaphragm.
Why Choose Repair Clinic for 2AC13B24P-1A Parts
- Genuine Lennox 2AC13B OEM Components: Two-ton run capacitors, contactors, and fan motors confirmed for the 2AC13B24P-1A platform Lennox central air conditioner parts.
- R-410A Puron Platform: The 2AC13B24P-1A uses R-410A refrigerant. Refrigerant circuit service requires EPA 608 certified technicians.
- Annual Capacitor Testing Priority: Pre-season capacitance testing is the most cost-effective preventive maintenance step for the 2AC13B24P-1A.
- 365-Day Returns: Return any uninstalled part within a full year of purchase with no restocking fees.
2AC13B24P-1A Parts FAQ
What is the 2AC13B24P-1A and what ton size is it?
The 2AC13B24P-1A is a two-ton, 13 SEER residential outdoor condensing unit using R-410A Puron refrigerant. The 2AC13B series identifies an older Lennox 13 SEER residential outdoor condensing unit platform. The 24 identifies two-ton capacity and B-1A identifies the cabinet configuration and production revision.
Why does my 2AC13B24P-1A hum but not start?
A unit that hums but does not start has most commonly failed at the dual run capacitor. Test the capacitor with a digital capacitance meter before testing any other component.
What refrigerant does the Lennox 2AC13B24P-1A use?
Confirm the refrigerant type from the unit data plate, as older Lennox 2AC13B series units may use either R-22 or R-410A depending on the specific production year. Always verify before ordering refrigerant circuit components.
How often should I test the capacitor on the 2AC13B24P-1A?
Test the capacitor annually before the cooling season. A reading more than 10% below the rated microfarad value indicates a weakening capacitor that should be replaced before it fails under peak summer load.
