Price Match GuaranteeWhirlpool Washing Machine 7MWTW1607AW1 Parts
Shop replacement repair parts for Whirlpool Washing Machine model 7MWTW1607AW1
Drive Clutch (Splutch) Kit. This kit has 6 parts; a spring, housing, cam ring, basket drive gear, pulley, and nut. The pulley is driven by the belt and the splutch works with the mode shift actuator to drive the washplate and spin the inner basket. A worn splutch can cause spin or washplate problems
Washer main drive belt. This belt is located under the washing machine and is used to drive the splutch pulley. It goes around the motor & splutch pulleys. Worn or broken drive belt can cause spin or washplate problems.
Washing machine tub suspension rod kit,. Set of 4 rods, 4 suspension balls and 4 bushings. The suspension rods help to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake.
Washing machine mode shift actuator. *Updated by the manufacturer, does not look like original part. Actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. Also has transmission speed/position optical sensor
Includes latch assembly, one white and one gray lid lock bezel. Lid must be closed for washer to fill, wash, drain, or spin. If the machine is not advancing into the cycle or is displaying a lid lock fault this may be the cause of the issue.
Transmission assembly with shaft, seal & bearing
Package of two 5-foot-long Industrial Braid hoses with pre-installed washers and straight ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
RC Item #3400
5 Foot rubber fill hose for hot or cold water
Residential Washer Hoses- Fits most major washer brands.
• Provides hot & cold water to the washer
• (2) 4 Ft. hoses for hot & cold water
• (4) Hose washers
• Anti-leak crimp
It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Package of two 6-foot-long Industrial Braid hoses with pre-installed washers and 90' ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Two 5 foot long rubber washing machine fill hoses with washers. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Drive motor
Commercial Grade Washer Hoses- Fits most major washer brands. Includes everything you need for easy installation including: • Universal connectors fit most major brands • (2) 4.5 Ft. water supply lines • (4) Hose Washers
Ten foot washing machine fill hose set for both hot and cold water. Set includes pre-Installed high quality Washers, and are 1050 PSI burst strength.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic