Roper Washing Machine RTW4640YQ1 Parts

Washing machine tub suspension rod kit,. Set of 4 rods, 4 suspension balls and 4 bushings. The suspension rods help to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake.

Washing machine drain hose kit. Includes clamp. 4 feet long

Washing machine drain pump. If the washer does not drain then the drain pump may be clogged, damaged, or defective.

Water valve and inlet assembly

Drain pump outlet hose

Transmission assembly with shaft, seal & bearing

Package of two 5-foot-long Industrial Braid hoses with pre-installed washers and straight ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

Drain hose extension kit *4 foot

Residential Washer Hoses- Fits most major washer brands. • Provides hot & cold water to the washer • (2) 4 Ft. hoses for hot & cold water • (4) Hose washers • Anti-leak crimp
It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

Washer drain hose extension kit. Used to extend washing machine drain hose approximately 4 feet. *Also, order the required adapter to connect the extension to the existing drain hose.

Hose from tub to water level pressure switch

Washer main tub seal. Located in the center of the outer tub at the transmission basket drive shaft. If the washing machine is leaking water from above the transmission this seal is likely damaged or worn out.

9 Foot drain hose extension kit

Drain Hose Extension Kit. 3’ 6” Long with a goose neck oft 6”

Package of two 6-foot-long Industrial Braid hoses with pre-installed washers and 90' ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.