Shop replacement repair parts for Trane Furnace model TUH1D120A9H51BA

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Hot Surface Ignitor Kit

Switch; switch-flame rollout, 82 degrees c, 180 deg

Thermal limit switch, open at 190 degrees, close at 160 degrees

Intergrated furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Switch; limit inducer

Draft inducer motor, one stage, ball bearing.The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Wire; harness assembly, including inducer/ignitor h

Wire harness assembly, includes inducer/ignitor harness with 4 pin male connector and control harness with 12 pin male connector.

Valve; gas, fast opening 1/2-14 npt, 24v, 50/60 hz,

Transformer; choke-line

Motor; constant torque, 1 hp, 115/60/1, 1050-600 rp

Transformer; 115v-pri 24v-sec 35va

Pressure Switch. open at -1.44 wc, close at -1.66 wc