Shop replacement repair parts for Trane Furnace model TUX080C942B3

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

HSI control module with four wire leads The HSIcontrol module regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Thermal limit switch, open at 180 degrees, close at 150 degrees

Run Capacitor, 10 uf, 440 VAC

Hot surface furnace ignitor with plug on connector

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Transition receptacle, includes four mounting screws

Door switch, 21 amps, 125/250 vac

MOTOR; 1/3 HP, 115/60/1 1075 RPM, 48 FRAME, PSC

Brass orifice spud, drill #45

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Gasket;collector box

Wheel; blower, 10 inch dia x 8 inch width, 1/2 inch

Filter; permanent, 25 x 16.5 x 1in.