Price Match GuaranteeColeman Furnace FG9D12020DH11G Parts
Shop replacement repair parts for Coleman Furnace model FG9D12020DH11G
Furnace control board. The control board regulates the supply of power to the furnace components.
Furnace hot surface igniter kit. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1
Voltage: 115
Full-Load Amperage: 14.4
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3"
Gas valve kit
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
High limit thermostat -140 open, 110 close
Run capacitor, Single, Oval, 370 Volts, 15 Microfarads
Pressure switch
Furnace draft inducer motor assembly. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Transformer, 120 volt primary 24 volt secondary 40 va
Pressure Switch, -0.75 SPNO contacts close on fall
Air pressure switch
Temperature control, manual close, opens at 140 degrees
Thermostat 1h/1c luxaire only
Tib 1 heat 1 cool t8600 ps 7 day program
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic