Shop replacement repair parts for Payne Furnace model PG8MAA060090AEJA

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Flame rollout limit switch re-settable 350F

Nitride Hot Surface Furnace Ignitor

Limit switch non-resettable 101-200F

Furnace draft inducer motor kit. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Furnace blower wheel. 12" X 11.93" 1/2" Bore. The blower wheel blows air out of the furnace and through the house. The blower wheel is attached to the blower motor shaft with a set screw. If the set screw is loose, the blower wheel will wobble on the motor shaft and be noisy as it turns.

Carrier furnace control board, The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Door switch

Pressure switch

Furnace draft inducer motor kit. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

24v gas valve 1/2" npt, 3.5" wc., ef32cw210

Furnace blower motor:
Horsepower: 3/4
Voltage: 115
Full-Load Amperage: 11
Hertz: 60
RPM: 1075
Speeds: 3
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 4"

Sight Glass

Pressure switch, dual

Heat exchanger kit