Shop replacement repair parts for LG Dryer model 79472

Drum Support Roller & Axle Set of 4 AGM75510755 set includes 4 drum rollers, the roller shaft, and mounting clips to ensure quiet operation. As the bearings wear, they self-lubricate, eliminating the need for additional grease. This set is compatible with various dryer models from LG and Kenmore.

Thermostat and thermistor kit. The thermostat has reset button in center that will trip due to poor air flow such as a clogged exhaust vent.

High limit thermostat at blower housing

Dryer moisture sensor bar. If the dryer timer does not advance properly inspect the moisture sensor bars for damage which can cause the automatic drying cycle to not work properly.

Dryer idler pulley and spring kit for drum drive belt

Gas dryer igniter with bracket and wire harness. This is a round spiral-style igniter. The igniter uses heat to ignite the gas in the burner assembly. If the igniter is defective, the gas will not ignite and the dryer will not heat.

Guide cover

LP conversion kit *Note: Sticker indicating the gas type is not included.

Felt seal, dryer drum

Dryer gas burner valve assembly. Two solenoids. When installing the new valve, transfer the orifice from the old valve to the new valve.

Idler pulley wheel with bearing

Blower wheel

Dryer drum drive motor with pulley. If the dryer does not start the motor could be bad. Before replacing the motor the door switch and thermal fuse should be tested to determine if they are defective.

Switch assembly, safety

Gas dryer flame sensor