LG Washing Machine WD-12412BD Parts

Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

The 6501KW2002B Rotor Position Sensor Assembly is essential for accurately detecting the rotor's position. When this sensor fails, it can trigger an LE error code on the control panel, indicating a malfunction. This sensor is compatible with various Kenmore and LG washer models.

Washing machine tub seal between outer & inner tubs

Washing machine tub seal. Located between the front outer tub and rear outer tub. If the washing machine is leaking water from between these two tubs, this seal is likely damaged or worn out.

Washing machine filter and trap assembly.

Shock Retaining Pin

Washing machine stator assembly with sensor

Washing machine drain hose with bellows. This drain hose makes a connection from the washer tub to the drain pump.

Washing machine door boot clamp for front panel.

Circulation or drain pump motor & impeller. This pump is found on both washing machines and dishwashers. On washing machines, this pump is used to circulate the water. On dishwashers, it is used to drain water from the dishwasher.

Washing machine rotor assembly. The rotor interacts with the stator to create a strong electromagnetic field which rotates the tub in either direction. If the magnets on the rotor are damaged, or if any part of the rotor is defective, the washer may not spin or agitate.

Heating element with sensor probe. Element has been changed. May require new wire harness to install. Please see related item.

Clamp assembly

Pump housing.

Outer tub vent tube (bellows)