Shop replacement repair parts for Samsung Dryer model DV40J3000EW/A2-0002

Dryer Heating element. If the dryer does not heat check for a blown thermal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Dryer thermistor. If the dryer displays a fault code the thermistor may be defective.

Dryer heating element assembly. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.

Dryer drum drive motor & blower housing assembly

Samsung dryer blower Wheel

Dryer drum felt seal

Dryer drum drive motor. If the dryer does not start, look for a defective door switch or thermal fuse. Also, if the motor cannot be turned by hand it has failed and will need to be replaced.

Dryer drum drive motor. If the dryer does not start, look for a defective door switch or thermal fuse. Also, if the motor cannot be turned by hand it has failed and will need to be replaced.

Lint filter with screen cover

Dryer Motor and Mounting Bracket Assemby

Main power control board

Thermistor, PTC

High Limit Thermostat L260-50F