Shop replacement repair parts for Samsung Dryer model DVG45T3200W/A3-00

Dryer thermistor. If the dryer displays a fault code the thermistor may be defective.

Dryer thermal fuse (also called the thermal limit). Located on the blower housing. The thermal fuse blows to cut off power to the dryer if the dryer overheats. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced.

Thermostat

Dryer drum drive motor & blower housing assembly

Gas dryer igniter, Samsung

Gas Valve, Burner and Tube Assembly

Dryer Motor and Mounting Bracket Assemby

Gas valve assembly

Wire harness

Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.

Assy pcb main