Shop replacement repair parts for Samsung Dryer model DV219AGB/XAA-00

Dryer thermistor. If the dryer displays a fault code the thermistor may be defective.

Thermostat

Gas dryer igniter, Samsung

Dryer drum drive motor. If the dryer does not start, look for a defective door switch or thermal fuse. Also, if the motor cannot be turned by hand it has failed and will need to be replaced.

Dryer gas valve

Wire harness

Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.

Assy m. wire harness

Main power control board. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective.