Shop replacement repair parts for Samsung Dryer model DV448AEP/XAA-03

Dryer Heating element. If the dryer does not heat check for a blown thermal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Dryer thermistor. If the dryer displays a fault code the thermistor may be defective.

Thermal fuse with bracket, located on the element housing. The fuse is not resettable and will need to be replaced if blown. If the dryer does not heat, the thermal fuse may be blown.

Dryer heating element assembly. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.

Dryer drum drive motor & blower housing assembly

Heating element

Dryer drum drive motor. If the dryer does not start, look for a defective door switch or thermal fuse. Also, if the motor cannot be turned by hand it has failed and will need to be replaced.

This is a Genuine Replacement Part. Whirlpool (WHIRA) 35001080 Motor - Dryer.

Wire harness

User control board assembly

Sub power control board assembly

Thermistor

High Limit Thermostat L260-50F