Price Match GuaranteeKenmore Dryer 11071402311 Parts
Shop replacement repair parts for Kenmore Dryer model 11071402311
Plastic leveling leg. White approximately 1" round x 1 3/4" long
Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.
Motor pulley, 60 hertz
Dryer tri-ring retainer for drum support rollers.
Heating element thermal cut-off (thermal fuse) 360 degrees and high-limit thermostat 250 degrees. The thermal fuse is a safety device designed to protect the dryer from overheating. A multimeter can be used to test the fuse. Always check the dryer venting when replacing a blown thermal fuse.
Lint screen housing foam seal
Spring clip inside control knob
RC Item #2683
Ring bearing kit, front of dryer drum
Dryer blower housing foam seal with adhesive backing. 26 in
Dryer front panel retainer clip. 1 clip per pack.
Shaft for drum support roller, left side
Push to start switch
Shaft for drum support roller, right side
Dryer LP (liquid propane) conversion kit. From Natural gas to LP.
Dryer vent testing kit is for 29" dryers with a top mounted lint screen. Use the plastic card to hang inside your dryer drum, then run the unit three times empty. If the card stays in place, the venting and dryer need to be cleaned out. Complete instructions are included.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic