Shop replacement repair parts for LG Dryer model DLE6100W

Side or bottom venting kit for LG dryers. Be aware gas models cannot vent to the right.

Screw
Restore your LG DLE6100W dryer to reliable operation with genuine OEM replacement parts from Repair Clinic. The DLE6100W is an electric dryer from LG’s DLE6100 series. The thermal fuse, heating element, drive belt, and drum rollers are the most frequently serviced components. Annual exhaust duct inspection prevents the thermal fuse failure that causes most no-heat complaints. Repair Clinic stocks genuine LG OEM parts for the DLE6100W including the LG dryer thermal fuse parts, LG dryer heating element parts, LG dryer drive belt parts, and LG dryer drum roller parts. Browse the LG dryer parts catalog filtered by DLE6100W for the complete parts inventory.
The thermal fuse on the LG DLE6100W is a one-time safety device that blows when exhaust temperatures exceed a safe threshold from a restricted duct. Inspecting and clearing the exhaust duct before installing a replacement thermal fuse is mandatory to prevent immediate recurrence. The dryer repair help section covers DLE6100W thermal fuse access, heating element testing, and drive belt replacement.
The thermal fuse blows when exhaust temperatures exceed a safe threshold from a restricted or kinked duct. Inspect and fully clear the exhaust duct before installing the replacement fuse.
Test the thermal fuse for continuity before testing the heating element. A blown thermal fuse prevents the element from energizing even when the element itself is intact.
The drive belt connects the motor to the drum. A broken belt causes the drum to stop rotating while the motor continues to run.
Worn drum rollers produce squeaking or thumping noise as the drum rotates. Replace the rollers as a set when any one roller shows flat spots or rough rotation.
The LG DLE6100W is an electric dryer from LG’s DLE6100 series with front-load access and a large drying capacity. The heating element, thermal fuse, drive belt, and drum rollers are the most frequently serviced components on this platform.
No heat is most commonly caused by a blown thermal fuse from a restricted exhaust duct. Inspect and clear the exhaust duct completely before installing the replacement fuse. A duct that is not fully cleared will blow the replacement fuse immediately under the same conditions.
Squeaking noise from the drum most commonly indicates worn drum rollers that support the drum as it rotates. Thumping noise indicates a flat spot on a drum roller from the drum sitting stationary for extended periods.
Disconnect power, remove the top panel and front panel to access the drum. Remove the old belt from the idler pulley and motor shaft, route the new belt around the drum in the same groove, then thread it around the idler pulley and motor shaft in the original configuration.

Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic