Shop replacement repair parts for LG Washer/Dryer Combo model W3S1CVK2RNS

Thermostat and thermistor kit. The thermostat has reset button in center that will trip due to poor air flow such as a clogged exhaust vent.

High limit thermostat at blower housing

Gas dryer igniter with bracket and wire harness. This is a round spiral-style igniter. The igniter uses heat to ignite the gas in the burner assembly. If the igniter is defective, the gas will not ignite and the dryer will not heat.

Dryer gas burner valve assembly. Two solenoids. When installing the new valve, transfer the orifice from the old valve to the new valve.

Dryer drum drive motor with pulley. If the dryer does not start the motor could be bad. Before replacing the motor the door switch and thermal fuse should be tested to determine if they are defective.

Gas dryer flame sensor

Heating element with sensor probe. Element has been changed. May require new wire harness to install. Please see related item.

Pcb assembly,main

Main Control Board

Parts assembly

Parts assembly