Shop replacement repair parts for Kenmore Washer/Dryer Combo model 417.90814001

Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

Washer drive belt. If this belt is broken, the washer will not spin or agitate.

Dryer heating element and housing assembly. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Idler pulley and arm, dryer

Bearing cup for drum support ball

This is a genuine replacement part. Frigidaire 5303937189 Motor and Blower HSG

This is a genuine replacement part. Drive Motor 134159500 Frigidaire motor.

Idler Pulley Assembly

Drum felt seal & glides

This is a genuine replacement Part, The model number and name for the following item: Frigidaire (FRIGB) 134216300 dryness control board.