Shop replacement repair parts for RCA Refrigerator model RSG20IBMCFWW

Refrigerator or freezer temperature sensor (also called a thermistor). The thermistor monitors the refrigerator, freezer, and evaporator temperature and sends the temperature reading to the control board.

Refrigerator light switch. This switch activates the refrigerator light when the door is open. It also prevents the dispenser from working if the door is open.

Refrigerator evaporator fan motor. If your motor has a white thermistor in the connector you need the related fan motor 914169. If it has a connector for a light you will need 1265886.

Evaporator fan blade

High limit thermostat for refrigerator or freezer defrost heater, L140-30F. This thermostat is normally closed for continuity at room temperature. If the high limit thermostat is open at room temperature, the refrigerator's defrost system will not work.

Condenser fan motor, 12 volt DC motor. *If you need 120 volt motor see Item #1257132

Condenser Fan Blade

Door switch, 3 wire fan & light

The GE Appliances Right Drawer Slide Rail supports the drawer as it slides in and out. It measures L:16 inches x W:2.125 x H:1.375 inches and is recommended to be installed with the appliance disconnected from all utilities.

Bumper

Mobility Wheel

The GE WR72X239 is a left-side Drawer Slide Rail for Refrigerators, replacing part number WR72X0239. It is important to reference the manufacturer or service manual before purchasing a replacement part.

The Genuine OEM GE Appliances Evaporator Fan Motor circulates air through the fresh food compartment for efficient cooling. It has electrical specifications of 9.75V and 3.25W and should be installed with the appliance disconnected from all utilities.

The GE Appliances Coil Cleaning Brush PM14X51 is a high-quality tool that helps clean dirt and lint from condenser coils in refrigerators, freezers, and air conditioners. It has a long handle to reach difficult places and is recommended to use safety equipment and disconnect utilities before use.

User interface board