LG Washing Machine WM2496HSM Parts

The 4681EA2001T Washing Machine Drain Pump and Motor Assembly is a genuine OEM replacement part that expels water from your washing machine or washer/dryer combo. This high-quality component ensures proper drainage. It's compatible with Kenmore, LG, and Kenmore Elite models.

Washer cold water inlet valve assembly. Three solenoids. Hot water valve is a separate single coil valve and can be found in related parts

Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

Rear tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.

Washer tub bearing, rear. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.

Washing machine stator assembly with sensor

Motor stator assembly

Circulation or drain pump motor & impeller. This pump is found on both washing machines and dishwashers. On washing machines, this pump is used to circulate the water. On dishwashers, it is used to drain water from the dishwasher.

Washing machine rear outer tub assembly with bearings. If the tub bearing system is defective the washer can become very noisy.

Washing machine rotor assembly. The rotor interacts with the stator to create a strong electromagnetic field which rotates the tub in either direction. If the magnets on the rotor are damaged, or if any part of the rotor is defective, the washer may not spin or agitate.

Washing machine rotor assembly. The rotor interacts with the stator to create a strong electromagnetic field which rotates the tub in either direction. If the magnets on the rotor are damaged, or if any part of the rotor is defective, the washer may not spin or agitate.

Main power control board assembly