Shop replacement repair parts for GE Profile Refrigerator model PSS26NSWCSS


Refrigerator or freezer temperature sensor (also called a thermistor). The thermistor monitors the refrigerator, freezer, and evaporator temperature and sends the temperature reading to the control board.

Refrigerator icemaker kit, The kit includes the fill cup, 4 pin wire harness adapter, and tube. If the icemaker is not working, make sure the freezer temperature is around zero degrees Fahrenheit. If the refrigerator temperature is correct, the icemaker or water valve could be defective.

The GE Defrost Heater and Bracket Assembly WR51X10055 is a high quality OEM part that melts frost from the evaporator fins during automatic defrost cycles. It is also known as the Refrigerator Glass Tube Defrost Heater and Bracket Assembly. Disconnected from all utilities prior to repair.

Refrigerator main control board assembly with installation instructions. This board also has the defrost controls built into it.

Evaporator fan motor with harness & thermistor

Refrigerator icemaker kit, The kit includes the fill cup, 4 pin wire harness adapter, and tube. If the icemaker is not working, make sure the freezer temperature is around zero degrees Fahrenheit. If the refrigerator temperature is correct, the icemaker or water valve could be defective.

Defrost thermostat for defrost heater. Infinite resistance at room temperature

Drain tube

Water valve

The GE Ice Bucket Assembly WR17X11447 stores and dispenses ice with the help of an auger. It weighs 8.05 lbs and should be installed with the appliance disconnected from utilities.

Refrigerator door gasket, white

Ice dispensing bucket auger drive motor

Freezer door gasket, white

Dispenser lighting board assembly

Chill fan with motor