Shop replacement repair parts for GE Washing Machine model WJRE5550H1WW

Washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle. If the drain pump is clogged, damaged, or defective, the washer won't drain properly.

Washing machine main tub bearing. Located at bottom of outer tub. The tub bearing helps to keep the inner tub spinning smoothly.

Suspension rod assembly (green)

Rod and spring assembly

Shaft and mode shifter assembly. The new mode shifter mounting holes are not threaded. You will need to use the original self tapping screws to install the new mode shifter assembly.

Triple water inlet valve

Main Control Board. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective.

Lid switch assembly

Backsplash asm

Switch pressure