Price Match GuaranteeWhirlpool Washing Machine WFW9400STA10 Parts
Shop replacement repair parts for Whirlpool Washing Machine model WFW9400STA10
Washing machine drain pump. *Coin trap only available with pump assembly. If the washer does not drain the pump could be locked up or a small object may be clogging it. Also a small leak in front of the washer could be caused by a defective pump.
Door lock latch
Washing machine drive belt. This part measures 48.22 inch long when uninstalled and will stretch to 51.53 inches when installed.
Washing machine water inlet valve assembly. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may fill slowly or not fill at all.
Panel, control (black)
Power cord
White controle panel
Control board kit. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective.
Center user interface control board
*Per the manufacturer both the center and right user interface controls must be replaced together. Use part number off the right control to correctly identify the kit
Panel, control (blue)
Panel, control (biscuit)
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic