Shop replacement repair parts for Frigidaire Washing Machine model ATF8000FS2

Washing machine drain pump. On some models you will need to configure the replacement pump to match the old pumps outlet port direction and reuse the old mounting bracket. If the washer does not drain then the drain pump may be clogged, damaged, or defective.

Washer water inlet valve with thermistor. If the washer fills slowly or does not fill at all, then the water valve may be restricted and require replacement.

Frigidaire 134370000 Drawer for Washing Machine. This part works with the following models: Frigidaire ATF6000ES0, Frigidaire ATF6000ES1, Frigidaire ATF6000FS, Frigidaire ATF6000FS0. Genuine replacement part.

Drain hose 98" long

Boot Seal Retaining Ring, Inner

Hose, dispencer to tub

Gasket between front & rear outer plastic tubs

Universal washing machine water supply hose set. Includes 2 extra strong 6 foot braided stainless steel hoses with hose washers already installed. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

Washing machine door bellows. If the washer is leaking, the door boot may have a tear in it. Overloading the washer is the most common cause for a torn door boot.

Air pressure hose

Spring Assy, suspension

Boot Seal Retaining Ring, Outer

Hose,drain ,tub-to-pump

Washing machine user control board.

Dispenser to bellows hose