Price Match GuaranteeWhirlpool Washing Machine WFW9400VE02 Parts
Shop replacement repair parts for Whirlpool Washing Machine model WFW9400VE02
Washing machine drain pump assembly. If the washer does not drain the pump may be clogged, damaged, or defective.
Washing machine water inlet valve. A long or slow fill cycle is often due to a restricted water valve. The valve should never be disassembled and cleaned, only replaced.
Front load washer door strike
Washing machine drive belt. This part measures 48.22 inch long when uninstalled and will stretch to 51.53 inches when installed.
Washing machine motor control unit. The motor control unit provides power to the motor. If the motor control board is defective, the washer may not function properly or may not work at all.
Rear outer drum assembly with bearing and seal. Bearing and seal not available separately from the drum.
Inner tub drive pulley
Control board kit. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective.
Machine control microcomputer. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective
This is a Genuine Replacement Part. Whirlpool (WHIRA) 8182793 Motor - Drive.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic