Price Match GuaranteeGE Dryer GFDS355GL0MV Parts
Shop replacement repair parts for GE Dryer model GFDS355GL0MV
Gas dryer igniter assembly with bracket and wire harness. If the dryer does not heat then the igniter may have burned out. The burned spot is normally visible. Be aware the igniter is very fragile.
High-limit thermostat for dryer. L315-65. If the dryer overheats, this high-limit thermostat will cut off the power to the drive motor. If the high-limit thermostat has blown, the dryer won't start.
Dryer center outlet thermistor. *Note that it is not in the heating circuit so it likely will not be the cause of a dryer heating problem. It can however effect cycle times or cause a fault if defective. The resistence reading should read around 100 k ohms at room temperature.
Inlet control thermistor. Resistence reading should be around 100K ohms at room temperature and decrease with temperature rise.
Dryer gas valve solenoid coil. Has two terminals.
Thermostat, high limit
Gas valve solenoid coil 3 terminal
Dryer drum drive motor and pulley. Wiring Harness Is Encased In The Styrofoam Inside The Box
Flame sensor at side of burner tube
The GE Appliances Backup Thermostat regulates heat in dryers if the control system fails. It replaces multiple part numbers and caution should be taken when servicing or repairing appliances. Consult the owner's manual for instructions and safety measures.
Main power board assembly
RC Item #1264211
Gas valve and supply pipe assembly, Natural gas
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic