Price Match GuaranteeGE Washing Machine GHDRE527H2WW Parts
Shop replacement repair parts for GE Washing Machine model GHDRE527H2WW
Washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle. If the drain pump is clogged, damaged, or defective, the washer won't drain properly.
Washing machine main tub bearing. Located at bottom of outer tub. The tub bearing helps to keep the inner tub spinning smoothly.
Lid switch and wire harness assembly. The lid switch assembly prevents the washer from spinning if the lid is open. If the washer won't spin, but will agitate, the lid switch might be defective.
Suspension rod assembly (green)
Rod and spring assembly
The GE Appliances Water Inlet Valve controls water flow into the washer and is also known as the Water Inlet Valve Assembly. It is recommended to disconnect the appliance before installation.
Shaft and mode shifter assembly. The new mode shifter mounting holes are not threaded. You will need to use the original self tapping screws to install the new mode shifter assembly.
Drive pulley
Control board. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective.
Washing machine drive motor
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic