GE Washing Machine WWSE5240DCCC Parts

Washer drive belt. The new belt will seem too small during installation. However, it will stretch and we offer a belt tool to help.

The Genuine OEM GE Appliances Drive Belt WH1X2026 connects the drive motor to the washer's drive system to spin the basket. It is a high-quality, black, V-shaped belt that measures 29 1/2 inches by 1/2 inch. Disconnecting the appliance from all utilities is recommended before installation.

Washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle. If the drain pump is clogged, damaged, or defective, the washer won't drain properly.

Washing machine main tub bearing. Located at bottom of outer tub. The tub bearing helps to keep the inner tub spinning smoothly.

Suspension rod assembly (green)

This is a Genuine Replacement Part. General Electric (GENF0) WH16X543 Washing Machine Suspension Rod.

This is a genuine replacement part. Suspension Rod WH16X544 G.E. suspension shock absorption.

The GE Appliances Water Inlet Valve controls water flow into the washer and is also known as the Water Inlet Valve Assembly. It is recommended to disconnect the appliance before installation.

Shaft and mode shifter assembly. The new mode shifter mounting holes are not threaded. You will need to use the original self tapping screws to install the new mode shifter assembly.

Drive pulley

This is a Genuine Replacement Part. General Electric (GENF0) WH20X10019 Washing Machine Drive Motor.

Motor and inverter assembly

Transmission drive pulley

Transmission and brake assembly, includes new tub seal