Shop replacement repair parts for Kenmore Dishwasher model 665.13439K704

Dishwasher drain pump. If the dishwasher does not drain then the drain hose could be clogged or the drain pump damaged or defective.

Dishwasher water inlet valve.
New design no longer includes or requires the mounting bracket. Valve mounts directly on the frame.
If the dishwasher won't fill properly, then the water valve is likely restricted and will need replacement.

Dishwasher drain hose loop with check valve. Goes from pump to drain; 67 inches

Drain hose extension. Goes from the drain hose loop to the house drain. 6-1/2 feet.

Door seal. 72.12 inches.

Cabinet seal between dishwasher and cabinets

Dishwasher pump & motor assembly. If the dishwasher washes poorly the circulation pump and motor may be defective or the wash impeller damaged.

12 Foot dishwasher drain hose extension. Goes from the drain hose loop to the house drain.

Heating element

Detergent dispenser assembly

Dishwasher circulation pump motor with wash impeller. Poor washing and noise during operation are indications of a circulation pump problem.

Spray arm

Control board. NOTE: This part is often misdiagnosed and may require some electrical testing to determine if it is defective.

Leveling Leg

Circulation pump housing with seal. Large port for soil sensor and thermistor.