Shop replacement repair parts for Kenmore Dishwasher model 665.13412K701

Dishwasher drain pump. If the dishwasher does not drain then the drain hose could be clogged or the drain pump damaged or defective.

Dishwasher water inlet valve.
New design no longer includes or requires the mounting bracket. Valve mounts directly on the frame.
If the dishwasher won't fill properly, then the water valve is likely restricted and will need replacement.

Dishwasher thermal fuse (or bi-metal fuse) assembly. The thermal fuse opens to cut off power to the dishwasher if the dishwasher overheats. If the thermal fuse fails, the dishwasher will not start. If the thermal fuse has failed, first investigate what caused the dishwasher to overheat.

Dishwasher door latch and switch assembly

Dishwasher pump & motor assembly. If the dishwasher washes poorly the circulation pump and motor may be defective or the wash impeller damaged.

Electronic control *Thermal fuse is not included. NOTE: If the dishwasher does not power up you likely need to replace the thermal fuse and not the control board.

Dishwasher circulation pump motor with wash impeller. Poor washing and noise during operation are indications of a circulation pump problem.

Main wire harness

Door Switch Also Referred To As A Latch Switch

Touchpad and control panel assembly, almond

Touchpad and control panel assembly, white

Touchpad and control panel assembly, black

Harness, vent