Shop replacement repair parts for Kenmore Dishwasher model 665.13739K603

Dishwasher heating element kit. If the dishwasher isn't drying the dishes properly, the heating element may have burned out

Dishwasher drain pump. If the dishwasher does not drain then the drain hose could be clogged or the drain pump damaged or defective.

Dishwasher water inlet valve.
New design no longer includes or requires the mounting bracket. Valve mounts directly on the frame.
If the dishwasher won't fill properly, then the water valve is likely restricted and will need replacement.

Dishwasher door gasket kit. Includes new strike for door latch. Look for tears, gaps or cuts in the gasket that could cause a dishwasher door leak.

Dishwasher drain hose loop with check valve. Goes from pump to drain; 67 inches

Drain hose extension. Goes from the drain hose loop to the house drain. 6-1/2 feet.

Dishwasher detergent and rinse aid dispenser. If detergent dispenser does not open or dispense the detergent or rinse aid properly then dispenser will need to be replaced.

Cabinet seal between dishwasher and cabinets

Dishwasher pump & motor assembly. If the dishwasher washes poorly the circulation pump and motor may be defective or the wash impeller damaged.

Dishwasher circulation pump motor with wash impeller. Poor washing and noise during operation are indications of a circulation pump problem.

Door seal at dishwasher control panel

Spray arm assembly, middle

Leveling Leg

Circulation pump housing with seal. Large port for soil sensor and thermistor.

Lower wash arm