GE Refrigerator GSS22IFPACC Parts

Refrigerator or freezer temperature sensor (also called a thermistor). The thermistor monitors the refrigerator, freezer, and evaporator temperature and sends the temperature reading to the control board.

The GE Refrigerator Water Inlet Valve WR57X33326 features a quick-connect fitting for easy installation and removal. Signs of a failing valve include no water flow to the dispenser or ice maker or leaks. The WR57X33326 is compatible with various GE and Hotpoint refrigerator models.

Refrigerator main control board assembly with installation instructions. This board also has the defrost controls built into it.

High limit thermostat for refrigerator or freezer defrost heater, L140-30F. This thermostat is normally closed for continuity at room temperature. If the high limit thermostat is open at room temperature, the refrigerator's defrost system will not work.

Refrigerator icemaker kit, The kit includes the fill cup, 4 pin wire harness adapter, and tube. If the icemaker is not working, make sure the freezer temperature is around zero degrees Fahrenheit. If the refrigerator temperature is correct, the icemaker or water valve could be defective.

Refrigerator defrost heater kit. This dual heater kit replaces single style heaters. If the refrigerators evaporator coils do not automatically defrost then this heater may be defective.

Refrigerator ice dispenser auger motor. The auger motor pushes the ice through the dispenser chute. If the auger motor is defective, the ice won’t fall through the dispenser chute.

Ice dispensing bucket assembly

The Genuine OEM GE Appliances Evaporator Fan Motor circulates air through the fresh food compartment for efficient cooling. It has electrical specifications of 9.75V and 3.25W and should be installed with the appliance disconnected from all utilities.

Grille clip

Dart clip

Refrigerator door gasket

Freezer door gasket

Evaporator thermistor clip

Clip drain tube