Whirlpool Washing Machine WFW9400SW04 Parts

Washing machine drain pump assembly. If the washer does not drain the pump may be clogged, damaged, or defective.

Shock absorber. This shock absorber prevents the washer from vibrating by absorbing the movements of the washer tub.

Package of two 5-foot-long Industrial Braid hoses with pre-installed washers and straight ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

Door lock/latch assembly for front load washer

5 Foot rubber fill hose for hot or cold water

Washing machine drive belt. This part measures 48.22 inch long when uninstalled and will stretch to 51.53 inches when installed.

Washing machine motor control unit. The motor control unit provides power to the motor. If the motor control board is defective, the washer may not function properly or may not work at all.

Package of two 6-foot-long Industrial Braid hoses with pre-installed washers and 90' ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

5-Foot-long nylon braided washer fill hose kit. They conveniently fit most major washer brands and provide hot and cold water to the washer. They feature 2-5 ft. braided water supply lines and 4 hose washers

Drive motor

10 foot fill hose

Control board

Control board kit. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective.

Machine control microcomputer. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective

This is a Genuine Replacement Part. Whirlpool (WHIRA) 8182793 Motor - Drive.