Maytag Dryer LDE1000GGE Parts

Dryer drum drive belt. This belt is approximately 1/4" wide x 92-1/4" long. It is flat on one side and has 4 ribs and 3 grooves on the other. It replaces many other belts, including some with 5 ribs and 4 grooves. The belt attaches to the motor pulley and spins the drum as the motor rotates

Dryer blower wheel, 3-1/8" deep, 8" in diameter, 7-1/8" hub diameter, 20 standard fins, ½" diameter motor shaft, 3/8" motor shaft diameter to flat side of shaft. If more than one blower wheel is listed with your model, call us with your model and serial number to verify the part.

Dryer drum drive motor assembly. If the dryer does not start the motor could be bad. Before replacing the motor the door switch and thermal fuse should be tested to determine if they are defective.

Front or rear felt seal for dryer drum

Drum glide kit, right side. *Pad has adhesive backing

Idler pulley wheel

Front glide kit, (1) right (1) left glide (2) pads with adhesive backing. Instructions included.

Belt idler rod and wheel assembly

Glide for main drum front support, left side

This is a genuine replacement part. Whirlpool 31001043 Blower Wheel.

Drum roller support assembly

Glide for main drum front support, right side

Drum drive motor 230v 60hz

Tumbler glide pad with adhesive backing

Dryer drum support roller kit with axles and mounting screws. The kit has been updated; it has 1 plastic spacer that is the same thickness of 2 old spacers.