Shop replacement repair parts for KitchenAid Refrigerator model KSRS25QAWH02

All-purpose silicon grease, ½ oz. Not food grade.

Ice maker bottom mounting bracket

Door switch

1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.

Icemaker fill tube

Thermostat assembly

Refrigerator evaporator fan motor. The evaporator fan motor draws air over the evaporator (cooling) coils and circulates the cold air through the refrigerator and freezer compartments.

Refrigerator ice bucket. This ice bucket stores ice and uses an auger to push the ice through the dispenser. If the auger is damaged, the ice dispenser won't dispense ice.

The Whirlpool Condenser Fan Motor 833697 cools hot refrigerant before it enters the evaporator. It includes hardware and instructions, is rated at 115v, 2 watts, and has a clockwise rotation. Use safety equipment and disconnecting utilities are recommended before any service or repair.

Screw, 8-18 x 3/8

Spray Paint - White

Refrigerator air diffuser assembly

Screw, 8-18 x 1/2

Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.

Screw 1/4" hex head, 10-12 x 1/2