Shop replacement repair parts for Maytag Dryer model MDG10PDEGL

Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.

Dryer igniter with wire harness connecter. This is a flat-style igniter. The igniter uses heat to ignite the gas in the burner assembly. If the igniter is defective, the gas will not ignite and the dryer will not heat.

Dryer high-limit thermostat, L220-40F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer won't heat.

Thermal fuse

This is a Genuine Replacement Part. Whirlpool (WHIRA) 33303391 Thermostat - Replacement.

Wire harness, main

Wire harne

Wire harne

Booster Coil, 50 Hertz Export Models

Secondary Coil, 50 Hertz Export Models

Circuit board

This is a Genuine Replacement Part ,The Model Number and Name for the Following Item: Whirlpool (WHIRA) 279923 Thermistor - Dryer.

Gas valve, 120 volts, 50 hertz

Motor *240V- 50/60Hz. For export dryers.