Price Match GuaranteeMaytag Dryer MDG8426AGW Parts
Shop replacement repair parts for Maytag Dryer model MDG8426AGW
Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.
Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.
Dryer igniter with wire harness connecter. This is a flat-style igniter. The igniter uses heat to ignite the gas in the burner assembly. If the igniter is defective, the gas will not ignite and the dryer will not heat.
Dryer high-limit thermostat, L220-40F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer won't heat.
RC Item #516650
Thermal Fuse
Cycling thermostat with internal bias heater, multi-temp, L150-25, 4 terminal, one piggyback terminal
Dryer drum drive motor kit with blower wheel 50 HZ Motor, Export Motor
Wire harness, main
Wire harne
Timer
Gas valve, 120 volts, 50 hertz
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic