Shop replacement repair parts for Kenmore Dishwasher model 665.13893K800

Dishwasher drain pump. If the dishwasher does not drain then the drain hose could be clogged or the drain pump damaged or defective.

Dishwasher thermal fuse (or bi-metal fuse) assembly. The thermal fuse opens to cut off power to the dishwasher if the dishwasher overheats. If the thermal fuse fails, the dishwasher will not start. If the thermal fuse has failed, first investigate what caused the dishwasher to overheat.

Dishwasher water inlet valve assembly. The water inlet valve supplies water to the dishwasher. If the water inlet valve is defective, the dishwasher may not fill or may underfill.

Door Switch

Dishwasher pump & motor assembly. If the dishwasher washes poorly the circulation pump and motor may be defective or the wash impeller damaged.

Dishwasher circulation pump motor with wash impeller. Poor washing and noise during operation are indications of a circulation pump problem.

Door latch

Electronic control board. NOTE: This part is often misdiagnosed. If dishwasher will not turn on check the thermal fuse mounted on the control board. You can enter your appliance model# in the repair help section of our website for additional repair help.

Control panel

Wire harness

Touchpad and Control Panel

Harness, vent