Shop replacement repair parts for Samsung Dryer model DV337AELXAA

Dryer Heating element. If the dryer does not heat check for a blown thermal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Dryer thermistor. If the dryer displays a fault code the thermistor may be defective.

Dryer heating element assembly. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.

Heating element

Samsung dryer blower Wheel

Dryer drum drive motor. If the dryer does not start, look for a defective door switch or thermal fuse. Also, if the motor cannot be turned by hand it has failed and will need to be replaced.

Heating element assembly

This is a Genuine Replacement Part. Whirlpool (WHIRA) 35001080 Motor - Dryer.

Power control board. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective.

Dryer lint filter

Blower wheel

Thermistor

High Limit Thermostat L260-50F