Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Chainsaw Fuel Filter Replacement #125-527-1
Echo Chainsaw Fuel Filter Replacement #125-527-1
Skill Level
Total Parts Cost
$16.20Estimated Savings
$112.5001:24
- Description
This video provides step-by-step repair instructions for replacing the fuel filter on an Echo chainsaw. The most common reasons for replacing the fuel filter are when the chainsaw engine won’t start, stops after a few seconds, or runs poorly.
All of the information for this fuel filter replacement video is applicable to the following brands:
Echo, Walbro, Shindaiwa
All of the information for this fuel filter replacement video is applicable to the following brands:
Echo, Walbro, Shindaiwa
Step By Step Instructions
1
Before you replace the fuel filter on your chainsaw first make sure the chainsaw’s engine has cooled then set the chainsaw on its side.
2
Unthread the gas cap and pull the retainer out of the tank.
3
Be prepared for some gas to spill.
4
Now use a wire with a hook to pull out the gas supply tube and filter.
5
Pull off the old filter from the tube.
6
Install the new fuel filter by pushing it into place on the tube.
7
Secure the filter with the retaining ring and gently reinsert the tube and filter back into the tank making sure there are no restrictions in the tube.
8
Insert the gas cap retainer into the tank then thread the cap on and tighten.
Description
This video provides step-by-step repair instructions for replacing the fuel filter on an Echo chainsaw. The most common reasons for replacing the fuel filter are when the chainsaw engine won’t start, stops after a few seconds, or runs poorly.
All of the information for this fuel filter replacement video is applicable to the following brands:
Echo, Walbro, Shindaiwa
All of the information for this fuel filter replacement video is applicable to the following brands:
Echo, Walbro, Shindaiwa
Step-By-Step Instructions
1
Before you replace the fuel filter on your chainsaw first make sure the chainsaw’s engine has cooled then set the chainsaw on its side.
2
Unthread the gas cap and pull the retainer out of the tank.
3
Be prepared for some gas to spill.
4
Now use a wire with a hook to pull out the gas supply tube and filter.
5
Pull off the old filter from the tube.
6
Install the new fuel filter by pushing it into place on the tube.
7
Secure the filter with the retaining ring and gently reinsert the tube and filter back into the tank making sure there are no restrictions in the tube.
8
Insert the gas cap retainer into the tank then thread the cap on and tighten.
Applicable Product Model
Parts Needed
Fuel Filter
$16.20
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com