Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Dryer Valve Solenoid Coil 2 & 3 Terminal 694539
Whirlpool Gas Dryer Valve Solenoid Coil 2 & 3 Terminal 694539
Skill Level
Total Parts Cost
$31.26Estimated Savings
$112.5001:24
- Description
This video provides step-by-step repair instructions for replacing the two and three terminal gas valve solenoid coil on a Whirlpool 27" gas dryer with lint filter at door. The most common reasons for replacing the gas valve coils are when the dryer isn't heating, takes too long, or won’t stop.
All of the information in this solenoid coil replacement video is applicable to the following brands: Whirlpool, Kenmore, Maytag, Amana, Speed Queen, KitchenAid, Roper, Norge, Magic Chef, Crosley
Tools used: flat-head screwdriver, Phillips head screwdriver
All of the information in this solenoid coil replacement video is applicable to the following brands: Whirlpool, Kenmore, Maytag, Amana, Speed Queen, KitchenAid, Roper, Norge, Magic Chef, Crosley
Tools used: flat-head screwdriver, Phillips head screwdriver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To access the gas valve solenoid coils remove the lower front panel by inserting a flathead screwdriver to release the two clips.
3
Detach the wire harnesses from both solenoid coils.
4
Remove the screws to release the bracket and pull the old coils off of the gas valve.
5
Install the new solenoid coils by sliding them onto the gas valve shafts and secure them with the bracket and screws.
6
Reconnect both wire harnesses, making sure each is matched to the appropriate coil.
7
Replace the lower front panel by snapping it into place.
8
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the two and three terminal gas valve solenoid coil on a Whirlpool 27" gas dryer with lint filter at door. The most common reasons for replacing the gas valve coils are when the dryer isn't heating, takes too long, or won’t stop.
All of the information in this solenoid coil replacement video is applicable to the following brands: Whirlpool, Kenmore, Maytag, Amana, Speed Queen, KitchenAid, Roper, Norge, Magic Chef, Crosley
Tools used: flat-head screwdriver, Phillips head screwdriver
All of the information in this solenoid coil replacement video is applicable to the following brands: Whirlpool, Kenmore, Maytag, Amana, Speed Queen, KitchenAid, Roper, Norge, Magic Chef, Crosley
Tools used: flat-head screwdriver, Phillips head screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To access the gas valve solenoid coils remove the lower front panel by inserting a flathead screwdriver to release the two clips.
3
Detach the wire harnesses from both solenoid coils.
4
Remove the screws to release the bracket and pull the old coils off of the gas valve.
5
Install the new solenoid coils by sliding them onto the gas valve shafts and secure them with the bracket and screws.
6
Reconnect both wire harnesses, making sure each is matched to the appropriate coil.
7
Replace the lower front panel by snapping it into place.
8
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Gas Valve Solenoid
$31.26
Recommended Tools and Accessories
Gas Valve Solenoid
$31.26
Total$0.00
Related Articles & Videos
02:30
Part Replacement
Whirlpool/Kenmore Gas Dryer Valve Solenoid Coil (2 Terminal) #694540
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com